Quoted from Russell:15 minutes? You must be very technically adept. I've been working on this for the last hour and a half. You have to remove a lot of stuff to get to that switch. Once I got in there, I realize that my switch feels very stiff. It is very hard to depress. I reversed it, reinstalled everything, and a ball can't even get past it. I've adjusted it so much the little metal part of the switch looks beat us. The lower switch feels fine. I guess I'll be calling Stern tomorrow, see if they can send me a new one.
For a stiff switch.. make sure the screws holding it are not too tight. That will cause a microswitch to bind. See if it eases when the screws are backed off