Quoted from KnockerPTSD:Mine shot fine for about 5mo. Now it cant make it all the way around the top anymore. Time to fiddle around and finally up my coil strength.
Have you cleaned the playfield/shooter lane?
Some time that's all that's needed.
You're currently viewing posts by Pinsider bundy.
Click here to go back to viewing the entire thread.
Quoted from KnockerPTSD:Mine shot fine for about 5mo. Now it cant make it all the way around the top anymore. Time to fiddle around and finally up my coil strength.
Have you cleaned the playfield/shooter lane?
Some time that's all that's needed.
Quoted from Bohdi:Think that would make that much of a difference? I'm having the plunge problem now too.
I know it does.
My plunger worked 100% for 1 month then started acting up.
Cleaned with Novus 1 and put on a layer of wax. Has been working again since.
Quoted from snaroff:For my KISS, I was told "The flaw is the trace on the board was too thin. It was failing under load".
When I received the "new" board (for ~$200), it had two "jumper" wires (that look awful). When I questioned if I received a "new" board, they claimed it was new, but still needed the 2 "jumper" wires! From my perspective, a $200 node board shouldn't require hacked jumpers, but WTF do I know!
Report back on what you find...[quoted image][quoted image]
That is some real Stevie Wonder soldering
Quoted from Tkaye:Do you need to call Stern directly for this protector or your distributor? I’ve never heard of it before now. Thanks.
Got mine from a distributor. They should take care of you, if not order it from Stern. You will need it over time.
You're currently viewing posts by Pinsider bundy.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/iron-maiden-issues?tu=bundy and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.