You're currently viewing posts by Pinsider RVH.
Click here to go back to viewing the entire thread.
Quoted from T-800:The sarcophagus captive ball shot quit working on me after a couple of plays as well. Still gotta diagnose that one, but it hopefully looks like it's the switch gap issue that seems to be plaguing this mech.
There is a hex post that screws into the bottom of the ball, see if that’s come loose first. I tightened mine with a Channel lock pliers on the ball and a wrench on the bottom. Sounds like a drop of lock tite would be easier though.
have you tried lowering the power on the auto plunge?
It’s under feature adjustment #74
I’ve got mine at 235.
Mine usually hits the post above the pop bumper when it misses.
Quoted from trilamb:Here are pics taken today. I feel like re-adjusting this is the last thing left other than replacing hardware, but I’m a bit worried to do it as I feel there’s a good shot I just throw off my manual plunge and make things worse. But I am tempted.
You have to take the right ramp and the large plastic under the right ramp to access the where you make the adjustment to the lane guide.
Pretty sure you know but just in case thought I’d say something.
You're currently viewing posts by Pinsider RVH.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/iron-maiden-issues?tu=RVH and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.