Quoted from Bundy:Have you cleaned the playfield/shooter lane?
Some time that's all that's needed.
Think that would make that much of a difference? I'm having the plunge problem now too.
You're currently viewing posts by Pinsider Bohdi.
Click here to go back to viewing the entire thread.
Quoted from Bundy:Have you cleaned the playfield/shooter lane?
Some time that's all that's needed.
Think that would make that much of a difference? I'm having the plunge problem now too.
Quoted from Bundy:I know it does.
My plunger worked 100% for 1 month then started acting up.
Cleaned with Novus 1 and put on a layer of wax. Has been working again since.
Good to know. Guess i'll be trying that this weekend. I got about 150 plays in and it started acting up.
Quoted from Milltown:Funny . I loosend the ball guide adjust in the shooter lane ... Maybe 1 whole turn out and the ball shoots perfect in manual and auto 99 percent of the time...
Hope to not sound stupid here, but could you post a pic of exactly what you adjusted?
Quoted from Milltown:At the end of the shooter lane under the plastic ... Remove the ball gate and plastic holds ... You can carefully get a flat head in there ...i loosened mine about 3/4 to half a turn and let it sit natural..,,,
I was having a horrible time making the orbit in manual and auto.... Now it works 99 percent of the time...[quoted image]
That's what i loosened and tried to push the guide as much "up" as i could because the ball was hitting the post below the upper left flipper, just above the skill shot target. It's better, but still not right. Are most people trying to move this guide up or down is my question. Thanks for the pic
Quoted from Milltown:I originally tried that .,then i tried the leave it one turn loose and it worked...
So you leave that screw just a bit loose then huh? I'll fuss with it some more. Appreciate it
Quoted from Mancave:Nope, the left pop is a flasher only!
I've always wondered this too. Guess now i know.
Quoted from siziel:I did it and now everything's fine.
Thank you all for your quick and kind replies, I really appreciated!
Make sure too to update the code to 1.08.
You're currently viewing posts by Pinsider Bohdi.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/iron-maiden-issues?tu=Bohdi and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.