---------- NOTICE ------------------------
I opened a Pinside store to keep track of these and the other mods since there are too many now and it's easier to keep track of it all in one place. The store is here:
https://pinside.com/pinball/market/shops/1170-pin-monk
International is not working there yet, though. PM me if you're international and I can look up shipping cost, but in general it's expensive to ship internationally.
--------------------------------------------
I have four different mods for various Iron Maiden inserts now. All of them are pictured in this post. All are available in the Pin Monk here on Pinside now.
First, I have the lens tree for the mode lights on Iron Maiden so they match the colors of the modes they represent instead of all of them being white (except the last one, 2MTM, which is red from the factory). It's plug and play - you just remove the light board, thread the existing 2 light board screws through the two connectors and screw the light board back in. Looks pretty good in the game.
EDIT: This is the final design MARK2 (I retook the picture to try to capture the colors better). First part is how it looks from the top of the PF lit, second one is the lens tree itself, the third part is how it looks with the light board re-installed over the lens tree...
lens-mod-d2 (resized).jpg
djreddog made a before and after comparison that really illustrates how much better it is with the mod installed:
Lens-Tree-BeforeandAfter-w-logo (resized).jpg
Here's the brackets I've made for the Eddie cards, Fireball loop, and Mummy lights, which are also for sale in the Pin Monk store here on Pinside:
EDDIE CARDS BRACKET (revised colors)
eddie_cards_sml-w-logo (resized).jpg
THE EDDIE CARDS BRACKET ITSELF:
bracket-under_pf-sml (resized).jpg
FIREBALL LOOP BRACKET (Loop Jackpot)
fireball-compare_sml-w-logo (resized).jpg
THE FIREBALL BRACKET ITSELF:
fireball_bracket_small (resized).jpg
MUMMY LIGHTS BRACKET:
mummy_before_after_sml (resized).jpg
mummy_bracket_installed_very_sml (resized).jpg
ORB COLOR BRACKET (Pro ONLY, Prem/LE is already RGB):
blue-version (resized).jpg
Here are some other mods you may find useful:
Metallica F-U-E-L lights bracket:
https://pinside.com/pinball/forum/topic/metallica-f-u-e-l-gauge-lens-bracket
Spike quiet fan upgrade kit:
https://pinside.com/pinball/forum/topic/replacing-stern-spike-noisy-ps-fans
ColorDMD gasket for Stern machines with the angled speaker panel:
https://pinside.com/pinball/forum/topic/colordmd-gasket-for-angled-stern-speaker-panels