Cheektavegas, NY
Wonder if you can get the shaker to off when Rudy is snoaring ? now that would be really cool!
(Topic ID: 247858)
Linked Games
Addams Family Gold (Special Collectors Edition), The
Bally, 1994-
Addams Family, The
Bally, 1992
-
Attack from Mars
Bally, 1995
-
Black Rose
Bally, 1992
-
Bram Stoker's Dracula
Williams, 1993
-
Cactus Canyon
Bally, 1998
-
Champion Pub
Bally, 1998
-
Cirqus Voltaire
Bally, 1997
There are more than 8 games linked to this topic.
Click here to show all linked games
Click here to show all linked games
Topic Gallery
You're currently viewing posts by Pinsider mollyspub.
Click here to go back to viewing the entire thread.
Quoted from Nepi23:Hi! And thanks for the exciting new product!
Just checking that would it work with a CCC (it has no A/V board and CPU-board is replaced with P-ROC)?
Waiting eagerly also the tests that it would work ok with European machines!
I have a similar question...will this work with Bride of Pinbot 2.0 that also uses a
P-ROC ? 
Quoted from Butch2099:Hi guys, just wanted to chime in here is saying that I've been working with Robert as a beta tester for the Shaker motor. I just installed it last night on my no good Gofers and it is awesome!
Installation was really easy, and his step by step instructions were very clear. The motor and everything associated with it is top-notch, thought out, and high quality. I really like the number of selections that you have to choose from that trigger the shaker. I also like how you can manually adjust how strong the motor shakes.
Robert was a pleasure to deal with and very interested in all of the feedback that I had to provide.
I think this one's going to be a big hit!
Courious if you hooked it up to the flashers or pop bumpers/slings. If you went the flasher route, can each flasher be adjusted seperatly for intensity or can one be completey bypassed?
2 weeks later
Quoted from drummermike:Just finished installing the shaker in my Funhouse. This was the easiest shaker install I have done. All the parts you need are included. The instructions were also very clear and correct. The only thing I did wrong was to run the short power cord up the back box. The 6' power extension cord is already in the harness that goes from the back box down to the lower cabinet.
I set my shaker to go off with the Rudy flasher only. It works great. I like that you are able to adjust the intensity of the shaking.
Well thought out product. May have to put one in CV.
Pm sent
1 week later
Quoted from robgo777:Hi Shredso,
I am glad you are enjoying your kit. If you wanted to mix triggers between harnesses "A" and "B" then yes that would require a custom harness. Please send me a message with your order number as well as which triggers you want and I will make one for you and send it out next week.
Best Regards,
Robert Goebel
Pinshakers
www.pinshakers.com
Considering getting one for my FH. How much would the custom harness cost? Can this be done with other games? It would be cool to have the Love Never Dies flasher (harness b) go off with harness a in BSD.
Quoted from Thor-NL:Isn't that Dip 6, Harness B, Speaker Pnl Flashers ?
You are correct. Edited my post .
You're currently viewing posts by Pinsider mollyspub.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
