Start a game to get a ball in the shooter lane.
Turn it off.
Pull the glass and place it aside.
Grab the ball.
Power up the game.
Roll the ball into the snake.
It should immediately eject the ball.
Repeat 10,20,30 times.
Any odd behavior?
You're currently viewing posts by Pinsider cody_chunn.
Click here to go back to viewing the entire thread.
Start a game to get a ball in the shooter lane.
Turn it off.
Pull the glass and place it aside.
Grab the ball.
Power up the game.
Roll the ball into the snake.
It should immediately eject the ball.
Repeat 10,20,30 times.
Any odd behavior?
That's why I wanted to test it in Attract. That bypasses the game code and runs a "ground level" if this switch is closed fire solenoid X. This tests the physical connections and functionality of the switch. If it behaves normally in attract but abnormally during play there may be some issues with the code dealing with that switch.
Have you tried reloading/a different rev firmware?
You're currently viewing posts by Pinsider cody_chunn.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/intermittent-metallica-switch-problem-a-challenge-for-you?tu=cody_chunn and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.