(Topic ID: 241241)

Interior Coin Door Labels?


By Ricochet

33 days ago



Topic Stats

  • 20 posts
  • 7 Pinsiders participating
  • Latest reply 17 days ago by Ricochet
  • Topic is favorited by 3 Pinsiders

You

Linked Games

Topic Gallery

There have been 6 images uploaded to this topic. (View topic image gallery).

C7E6C47A-B6AB-49DB-9C78-A90CB2EED43C (resized).jpeg
barcode_33_coindoor_label.pdf (PDF preview)
20190423_062106 (resized).jpg
barcode_test (resized).jpg
0685FFDF-93E9-4AFE-9768-77D3F8A58A5B (resized).jpeg
coindoor-inside (resized).jpg

#1 33 days ago

This may seem silly... but I had my coin door powder coated ... the stickers on the coin accepter panel blanks were naturally lost in the process. I would like to replace them for completeness. I’ve not found them reproduced yet. My coin door is ‘93 WPC style. The top label is instructions and the bottom is a caution label.

Just looking for replacements if anyone has done this.

Thanks !

#2 33 days ago

.

#3 33 days ago

Those labels pertain to the blockout plate installations when you install a bill acceptor.

#4 33 days ago
Quoted from KenLayton:

Those labels pertain to the blockout plate installations when you install a bill acceptor.

Yes Ken thank you for the proper description
This pic is of a slightly newer version than mine, but the labels are the same.

I should have scanned them before I sent it off to be coated. I'm hoping if the've not already been reproduced, someone can scan them and I can get them made in a decent quality (laminated) label.

The main two are the instruction label and the danger label. The 33 barcode would be cool but not necessary.
coindoor-inside (resized).jpg

#5 32 days ago
Quoted from Ricochet:

Yes Ken thank you for the proper description
This pic is of a slightly newer version than mine, but the labels are the same.
I should have scanned them before I sent it off to be coated. I'm hoping if the've not already been reproduced, someone can scan them and I can get them made in a decent quality (laminated) label.
The main two are the instruction label and the danger label. The 33 barcode would be cool but not necessary.
[quoted image]

Head over to Inkochnito's site or ask him.

#6 32 days ago
Quoted from eyeamred2u:

Head over to Inkochnito's site or ask him.

Thank you! I can't believe I don't have that site as a bookmark!!! I did find the danger label there. I reached out to him on the other... perhaps he has it and/or I missed it.

#7 32 days ago

If someone could post a better image then I could do my magic.
The one in the post here is just too small and unreadable.
I would also need to know the size of the label.

Barcode label is possible, but again I would need an example and size.

Peter
http://www.inkochnito.nl

#8 32 days ago
Quoted from Inkochnito:

If someone could post a better image then I could do my magic.
The one in the post here is just too small and unreadable.
I would also need to know the size of the label.
Barcode label is possible, but again I would need an example and size.
Peter
http://www.inkochnito.nl

Thanks Peter!!!!

I should have scanned the darned thing before I sent it off to be coated. I'm hoping someone may be generous enough to pop off their blank plate and throw it on a scanner. Removal of the blank is very easy and requires no other disassembly. There is also a "33" bar code label on the bottom blank that would be cool to have but that's not that big of a deal.

Thanks to anyone in advance who can help.

0685FFDF-93E9-4AFE-9768-77D3F8A58A5B (resized).jpeg
#9 31 days ago

I assume you have your coin door back.
Can you determine the size of the label for the image compared with the coin door?
The image is good to work with.
I just need to know the size(s) for now.

Peter

#10 31 days ago

I've done a little test on the barcode....
It seems it isn't a standard barcode.
What you see is an image (screenshot) from a Word file.
The white square is "3 3".
Just to see the barcode for 3.

barcode_test (resized).jpg

#11 31 days ago
Quoted from Inkochnito:

I assume you have your coin door back.
Can you determine the size of the label for the image compared with the coin door?
The image is good to work with.
I just need to know the size(s) for now.
Peter

I’ll give it a shot!
Thank you

#12 31 days ago

Here you go. plus I have sent scan to Peter as well as the danger one.

20190423_062106 (resized).jpg

#13 31 days ago
Quoted from Jakusu:

Here you go. plus I have sent scan to Peter as well as the danger one.
[quoted image]

Awesome !!!! Can you get him the dimensions of that label? I would just be guessing at it.

Thank you so much !!!

#14 29 days ago

I've created the file.
It will be on my website at the end of the month.
Look in the Williams (red) section for "Bill Acceptor label".

Peter
http://www.inkochnito.nl

#15 29 days ago

This is so great! Thank you again everyone!

Now to find someone who can print these on a nice glossy or laminated adhesive backed paper!!!!

#16 29 days ago

Flashinstinct may have had them also??

#17 28 days ago
Quoted from Ricochet:

This is so great! Thank you again everyone!
Now to find someone who can print these on a nice glossy or laminated adhesive backed paper!!!!

I can make it for you.

1 week later
#18 20 days ago

I've found the correct format for the barcode sticker.
The sticker actualy says *33*
I don't know why, but that is it.

barcode_33_coindoor_label.pdf
#19 20 days ago
Quoted from Inkochnito:

I've found the correct format for the barcode sticker.
The sticker actualy says *33*
I don't know why, but that is it.[quoted image]

Cool!!! Thanks !!!

#20 17 days ago

eyeamred2u ... these are PERFECT!!! Thank you !!!

C7E6C47A-B6AB-49DB-9C78-A90CB2EED43C (resized).jpeg
Promoted items from the Pinside Marketplace
$ 49.99
Playfield - Toys/Add-ons
Lighted Pinball Mods
From: $ 5.00
Cabinet - Other
Rock Custom Pinball
$ 129.00
Lighting - Led
LED OCD
From: $ 40.00
Cabinet - Other
Rock Custom Pinball
Wanted
Machine - Wanted
Blandon, PA
From: $ 220.00
$ 123.00
Playfield - Toys/Add-ons
Lermods
From: $ 20.00
Cabinet - Other
Rock Custom Pinball
$ 21.00
From: $ 29.00
Boards
KAHR.US Circuits
$ 29.99
Cabinet - Sound/Speakers
Lighted Pinball Mods
$ 49.95
Playfield - Toys/Add-ons
pinballmod
$ 45.00
Gameroom - Decorations
Pinball Photos
Wanted
Machine - Wanted
Watertown, WI
8,000 (OBO)
Machine - For Sale
Orion Township, MI
From: $ 19.50
Apparel - Unisex
ArcadeMade
$ 69.99
Playfield - Toys/Add-ons
Lighted Pinball Mods
$ 55.00
Gameroom - Decorations
Pinball Photos
$ 10.00
Cabinet - Sound/Speakers
Gweem's Mods
$ 50.00

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside