As posted in other post I’m in thank you.
You're currently viewing posts by Pinsider pinballocd.
Click here to go back to viewing the entire thread.
Quoted from Davi:The board needs 12V DC input.
Depends of your existing installation, we have 4 methods:
A: if the package contains power harness, and you don’t have power supply. Applicable for Factory
sound board and PinSound.
B: if the package contains power harness, and you don’t have power supply, but you use Power Booster
harness by PinSound. Applicable only for PinSound.
C : you have 12V power supply. Wire the GND and 12V DC to the opto board.
D: you don’t have power supply, you did not order power harness: you have to hook GND and 12V DC
from the backbox on your own.
For A and B, I can offer plug&play harness (need to solder one end to opto board).
In case of C and D, you have to provide power source.
Ok so I have a pinsound board and pinsound shaker. So are you saying I can plug into the pinsound power tap plug? I believe they have a extra plug coming of of it. Is this correct?
Thanks!
You're currently viewing posts by Pinsider pinballocd.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/interest-check-data-east-ball-trough-opto-board-?tu=pinballocd and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.