Hi Davi
I’d like to get on the waiting list for two if possible with harnesses... Thank You.
tommy
guns & roses
Hi Davi
I’d like to get on the waiting list for two if possible with harnesses... Thank You.
tommy
guns & roses
Quoted from balliswild:Hi Davi
I’d like to get on the waiting list for two if possible with harnesses... Thank You.
tommy
guns & roses
Thanks, noted.
Quoted from balliswild:Hi Davi
I’d like to get on the waiting list for two if possible with harnesses... Thank You.
tommy
guns & roses
Thanks, noted.
Quoted from 29REO:Got mine recently. Looks like it’s built like a tank. Beautiful workmanship. Thanks
Thank you!
Yeah, it's worth the wait. This guy is a craftsman. The board is very nicely made. Now I have my DEJP back. And the first full game I played I broke the house record. Seriously.
Quoted from fixintoplay:Yeah, it's worth the wait. This guy is a craftsman. The board is very nicely made. Now I have my DEJP back. And the first full game I played I broke the house record. Seriously.
Thank you!
Got mine and will be installing in the next week or two and will report back. Documentation on installation looks great too. Thx again Davi and I may grab another just to have on hand.
Quoted from KoolFingers:Got mine and will be installing in the next week or two and will report back. Documentation on installation looks great too. Thx again Davi and I may grab another just to have on hand.
Thanks for feedback!
Quoted from Derrick2811:Hi Davi,
Just looking to see how the next batch is coming along. I'm post #136. I'm a little excited to shop and mod my JP!!
I am running endurance test on the new revision.
This board is a bit smaller, and -except the opto parts- based on surface mount technology.
If everything is OK, I am going to create the next batch in 2-3 weeks.
Quoted from Davi:I am running endurance test on the new revision.
This board is a bit smaller, and -except the opto parts- based on surface mount technology.
If everything is OK, I am going to create the next batch in 2-3 weeks.[quoted image]
Awesome!!! Thanks!!
Quoted from Buffett:so wanting this mod.
please add me to the list.
Awesome work.
PM sent.
Peace
Buffett
Quoted from YERFDOG:Can you add me to the list please? With a harness please! Thanks!
Eric
List has been updated.
Quoted from Sonic:Finally got around to installing my opto trough board in my TFTC.....I had some reflection issues from the top of the trough - which is noted in the manual
wait, there's a manual? Started stripping apart my jp fixing a few things so thought I should do this one too.
Davi was there a document for install for these? I don't recall seeing one originally and I cant find it with my parts (entirely possible i've lost it somewhere along the way). I don't quite know what I should be plugging the harness into.
Quoted from koops:wait, there's a manual? Started stripping apart my jp fixing a few things so thought I should do this one too.
Davi was there a document for install for these? I don't recall seeing one originally and I cant find it with my parts (entirely possible i've lost it somewhere along the way). I don't quite know what I should be plugging the harness into.
Link for manual has been sent in PM. For new board revision, I need few days to update this document.
Quoted from Jurassicjonas:I would love one of these, is there a waiting list?
/Jonas
Yes, you are in.
Please could I order one also with harness / manual... many thanks and sorry for getting in on this late....
Quoted from chrishoyle99:Please could I order one also with harness / manual... many thanks and sorry for getting in on this late....
No problem, see my next post.
Quoted from TheHoss:I’d like a spot on the list, or a surplus board if still available.
No problem, PM sent.
In need of manual. Hopefully all my questions will be answered once I have a manual in hand. I noticed that the mounting plate is no longer included in this version.
Quoted from peteyhugs:In need of manual. Hopefully all my questions will be answered once I have a manual in hand. I noticed that the mounting plate is no longer included in this version.
PM sent.
Quoted from TheHoss:Great packaging, great instructions, great product. This thing rocks! You ROCK! Thank you again Davi[quoted image][quoted image]
Thank you
Quoted from Davi:1 board left.
I'll take it with harness for TFTC
How much extra for harness, and how much is shipping to usa costing on average?
Quoted from miracleman:I'll take it with harness for TFTC
How much extra for harness, and how much is shipping to usa costing on average?
The cost of kit:
$115 (opto board) + $20 (harness), total $135 (shipped).
Quoted from Davi:The cost of kit:
$115 (opto board) + $20 (harness), total $135 (shipped).
Sounds Good!
OK to go.gifQuoted from r3con:Hi Davi when will you be doing the next lot? I'm in New Zealand and have an LAH with the classic trough issues.
No plan for the next lot. I consider to outsource this project. If it's done, I will update this thread.
Hi @Davi, I would love to also get on the list if you do another run! Crossing fingers you get the motivation to pursue this again~
Quoted from ImNotNorm:Could I get a manual? I'm finally getting around to installing mine. I have the harness and would like to tap power from the backbox. Thanks Davi !
PM sent.
Quoted from Davi:PM sent.
Got it installed and it's working like a charm Davi !
It took some adjusting and sanding some gnarly divots out of the trough, but it's working great. The 6 ball multiballs on my TFTC are smooth now. No more rollover switch Tom Foolery.
Much appreciated!
20220105_200923.jpgQuoted from lmarchese:Hi! Wondering if there will be another run, and if I can be added to list. This is for a TFTC I am rebuilding. All the best!
I also just came across this and it would be great for my TFTC. Will there be more?
Quoted from vgatchaman:Please please please let there be another run. Getting tired of my JP looking for the ball. The switches used to fix the trough problem are discontinued.
Switches are available. You need to add a diode.
https://www.pinballlife.com/williamsbally-ball-detect-blade-with-roller-sub-microswitch.html
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/interest-check-data-east-ball-trough-opto-board-/page/4 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.