OP

Quoted from pinballsp:

No, it's not dead, it's alive and very much alive, it's one of the SIX projects I'm working on right now.
The thing is, I've decided to never post product development threads again, for two main reasons.
1.- Avoid those who are dedicated to copying, plagiarizing, stealing and hacking my ideas and designs. The Germans are experts at that, it already happened to me with the DMD and the hologram kit and it will never happen to me again. Then these guys, also have so little shame that they say you have copied them, cynical and liars, very bad people.
2.- Avoid the TROLL who systematically fill my threads with garbage, lies and defamation. Again the sect of the Germans and some other idiot (I think there was an Englishman and an American), experts in inventing lies and making a bunch of fools repeat them like parrots, to see if by repeating a lie a million times becomes true. In a normal forum the TROLLs are banned, here it depends on who is harmed, that happens or not, it seems that I am on the list of those who can be insulted and nothing happens, of others you cannot even say that their product seems low quality, your message is deleted and you are threatened with banning. Solution, ignore the morons and don't post development threads anymore.
When this and the rest of the projects I'm working on are finished, I'll post it in a new thread, with photos, videos, features and price so that whoever is interested can buy it.
You can also follow the status of my designs on my Facebook, there are many things that I don't post on forums, only on my Facebook https://www.facebook.com/Pinballsp
Here is a sample of some videos we are working on for the Twilight Zone (14 videos will be made for the TZ), now working on the Tina doll video. A set of videos for the Addams Family and Data East's Star Wars is also planned. The electronics of the controller board is a much improved evolution of the Holomodsp from the hologram kit, with a much more powerful new processor, outputs to control mods via serial port, other types of outputs that I prefer not to mention for now, and in addition to capturing the state of switches, lamps, flashers and coils, sounds are also captured.
Designed to install up to 5 video bumpers on the same pinball. Three in the TZ, four in the SWDE, and probably between four and five in the TAF. It can be installed in any Bally/Williams and in the Data East, I'll see if I also prepare an interface for the Stern.
Do you have a TOM? My star project will be for that machine (not video bumpers, it's another much more striking design), it's the one I'm spending more time and working on now, I think it will be even better than the Holomodsp of the Creature. Other projects will be more universal, for many pinball models.
 

[quoted image]