This is an Interactive Godzilla replacement for the stock Godzilla figure. Thanks to everyone who provided feedback and suggestions during development.
-Detailed Godzilla Figure mounted to a bolt-in clear plastic
-Microcontroller driven movement and lighting
-Head moves from sided to side
-Body moves forward and backward
-Atomic Breath LED
Modes (See videos below):
-Bridge Attack Mode: Triggered when the bridge coil is fired. Body movement and Head/LED follows the length of the bridge.
-Building Collapse Mode: Triggered when the building moves up and down using an opto sensor. The head turns towards bridge, body movement and LED fades in and out.
Installation requires removing/replacing the existing Godzilla and plastic on the top side. Underneath the playfield you will install the controller, power supply, opto sensor and bridge coil sensor. You will need experience working under the playfield and be comfortable installing and adjusting sensors. If you don't feel qualified, please enlist the help of a pinball tech. A 20 page instruction manual with many pictures will be provided. If you get stuck, reach out and I will assist. Finally, if you don't get it working or don't like the mod for any reason, return it in good condition and I will return your money.
The cost is $365 plus $15 shipping in the US. If you are outside the US, I will ask for an address and charge actual shipping costs. Building these is time consuming. I will be making them in small batches and contact each Pinside user for payment via PM once yours is ready. If I don't hear from you within 3 days, I will move to the next user on the list.
Videos showing the Building Collapse mode
Video showing the Bridge attack mode
Below is the list of interested users who PM'd me or posted in this thread. If I missed you, please send me a PM.