Addams Family, The
Bally, 1992You're currently viewing posts by Pinsider Parzival.
Click here to go back to viewing the entire thread.
Has anyone been through this process before? I hooked up the replacement board as indicated (leaving J801 unconnected), but I'm wondering if there is anything I have to do with the existing TAF flipper hold daughter board
As I have it hooked up now, I am getting no power to any flippers
IMG_2071 (resized).jpgIMG_2072 (resized).jpgUpdate on this - I have all flippers powered now. I disconnected everything from the daughter board, and removed the fuses. Doing this, gave me power to the two bottom flippers, but still nothing to the top.
Then, I connected J902 (which was on the daughter board) to an empty high powered solenoid spot on my P/D board (J131). This gave me power to the two upper flippers.
Still a little nervous as the board didn't really come with instructions, and I don't want to do further damage. Is it safe to plug what was J902 into J131?
IMG_2074 (resized).jpgIMG_2075 (resized).jpgYou're currently viewing posts by Pinsider Parzival.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/installing-rottendog-fliptronics-ii-replacement-in-taf?tu=Parzival and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Grand Forks, ND
Auckland, NZ