how do you install a toggle switch on the older wedge heads gottlieb thanks
Quoted from DirtFlipper:or, to preserve the originality of the game, can just plug it into a power strip.
.....There's always that...
My Buckaroo won't come back on with the power strip, only shuts it off. I have to reach in the coin door and trip it. I'm pretty sure it is on free play, and there are usually still credits on the game when I turn off the power strip. ???
Quoted from presqueisle:My Buckaroo won't come back on with the power strip, only shuts it off. I have to reach in the coin door and trip it. I'm pretty sure it is on free play, and there are usually still credits on the game when I turn off the power strip. ???
If it's truly on free play, then pressing the replay button on the front of the coin door should power it back on (and start a game in the process). A toggle switch alone won't turn power back on for this era of game; the Hold relay needs to be bypassed too. Left as original though, they require either a coin switch to close, or the replay button (which is activating the Start relay) in order to power back up.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/installing-a-toggle and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.