So I purchased a Mars AE 2411 upstacker for a Stern Spider Man. The harness works great, I’ve figured out the pins, and I’m wiring it to the tourney button to be able to run optional 50/50 charity tournaments (for Project Pinball!) while still allowing free play for others. Yay!

I can’t figure out the physical mounting, though. The coin door says it’ll take a Mars 2000 series upstacker, but the screw holes all seem too narrow on the stacker. Am I missing something obvious? And I gather that the “1” in the product title means that I need a bezel for the front, but I’m not sure where to source just that part.

Considering just a ton of zip ties, but I know that’s a bad idea.

Thanks, all.

13440627-C0D3-4BC4-B999-8D482E6B2547 (resized).jpeg

1778A253-BDC6-4AE7-92B2-BAAE34F7F79C (resized).jpeg

1F22CFAC-DAF6-457F-A10F-8E756DE7F05A (resized).jpeg

993CBD4D-D51C-4847-872C-473660B532D9 (resized).jpeg

image (resized).jpg

image (resized).jpg