You're currently viewing posts by Pinsider McPin54.
Click here to go back to viewing the entire thread.
I have all the gremlins outa the game except 1
I can not get any of the insert lights to come on. I have continuity from the board to sockets (CN 6 & 7).
I noticed the green led on the driver/mpu for the PIA is off. Could the Lamp PIA cause all the controlled lights to fail?
Also I dont see 18v at CN7 as shown in Schematic
All fuses are good
Where should I go from here.
Any and all help is much appreciated
Thank you in advance
20201025_162725 (resized).jpg20201025_162840 (resized).jpgQuoted from kba78:Check the fuses mounted to the backbox. Under the power supply and above the big blue capacitor.
Fuses are all good.
I did find the issue. Odd, I checked the bridges and they checked out functional in Diode test. One measured close to 600, so I figured I'd change it anyway and that was the issue. Its been my experience 400-600 you're good. This one was 599, lol.
Thank you for the response.
You're currently viewing posts by Pinsider McPin54.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/insert-lights-simpsons-data-east?tu=McPin54 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Massillon, OH