Bad diode on a switch somewhere? Check the row and column that the slam tilt is on in the switch matrix. Also, check the diode on the switches above the mode start hole. Might be smashed and can cause funny issues.
You're currently viewing posts by Pinsider pincredible.
Click here to go back to viewing the entire thread.
Bad diode on a switch somewhere? Check the row and column that the slam tilt is on in the switch matrix. Also, check the diode on the switches above the mode start hole. Might be smashed and can cause funny issues.
Did you visually inspect the diode under the POA above the mode start hole?
Humor us and take a photo.
Start a game and test every switch and see if you can get the slam tilt error to occur. Test all of the switches on the POA.
Testing switches in switch edges isn't going to produce a slam tilt. Try testing the switches during game play, not in test.
There is a switch on the bottom side of the path of adventure, the diode on this gets smashed and shorts on the lugs of the switch often causing phantom switch problems like the one you're having.
You're currently viewing posts by Pinsider pincredible.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/indy-jones-wms-slam-tilt-only-when-modes-complete?tu=pincredible and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.