I am currently taking orders for the next batch of my Indy-flasher-mods in the German Flipperforum.de and thought that someone here might also be interested.
Here are some pictures.
20230316_133308 (resized).jpg20230316_150039 (resized).jpg
20230316_150600 (resized).jpg20230322_110814 (resized).jpg
20230322_110929 (resized).jpg20230322_111037 (resized).jpg
Each figure is individual and hand-painted
I developed the flasher mod for the Williams indy but it probably looks good in the Stern indy too. But I haven't tried that yet.
If anyone is interested, I'll be happy to add them to my list. Cost for the mod: 40€ + postage. I offer the STL print file here for download:
https://cults3d.com/de/modell-3d/kunst/indiana-jones-pinball-ruin-flasher-mod

I have no experience with that.
I print the figures in pla. Usually in yellow.
The flasher should be replaced by an LED flasher, normal flashers are not bright enough.
If desired, the figure can also be printed in transparent filament, then it glows white or in the color of the led flasher used.

As I don't know of a way to get my hands on that (wish I could), I can't comment on that.
but I also suspect that it doesn't fit.
It is designed to replace the flasher on the classic ruin.
I redesigned my classic ruin a bit as well
20220217_175824 (resized).jpg
20220218_101633 (resized).jpg
20220218_101645 (resized).jpg
20220218_101655 (resized).jpg
20220218_183328 (resized).jpg
20220218_183537 (resized).jpg

Short info:
I received a few orders through Personal Massage.
If anyone else is interested, please send me a pm.

I've started printing now and will probably done with that in about three weeks.

Therefore, the batch is still open until then.
From April 16th I will not accept any more orders and will not offer any more batches in the foreseeable future.
20230316_150039 (resized).jpg20230316_150600 (resized).jpg20230322_111037 (resized).jpg

Sensation!
Inca stonemason manufacture discovered in the Andes.
20230501_094500 (resized).jpg
20230501_094536 (resized).jpg
20230501_094611 (resized).jpg
20230501_094806 (resized).jpg
20230501_103206 (resized).jpg

The last batch is done.
I'll take care of shipping in the coming days.

I can put the flasher mods in packets with the appropriate addresses and mail those packets in a single larger packet to one person.
Or I can send the figures individually.
As you like.
It doesn't bother me.
But insured shipping to the US is about $50 per package (I'll see if another company can do it a bit cheaper).
Of course, it would make sense for you if I only send one package to America.

I can send the package with Hermes for 30 $.

but I can't say something about the customs duties on your side.

In principle, everything is ready for dispatch.20230505_183850 (resized).jpg

SiN13
Perfect. I will take care of everything in the coming days and then get back to you. I would prefer it if the total amount came from one person.

Chosen_S The additional order of the pinball parts definitely fits into the package, you can pay for these parts independently of the rest of the payment. I will order today.

Briefly for information:
The luminous effect of the flasher mods is designed for led flashers.
Normally I don't replace my flashers with leds.
But for the flasher mod it makes sense to install a led.
It also doesn't glow for too short a time because the filament still "glows" and the lightbulb effect is retained.

The luminosity is then optimal in my opinion.

Glad the package arrived safely.
I hope you are satisfied with the product.
Many thanks to SiN13 for the coordination!!!

Thank you for the great picture.
I am pleased that everything went well and that the figures were well received.

I had made a large batch, they were all pre-ordered (mainly in my German pinball forum).
There is no mod left.
I might be able to make a new batch.
However, I would only make a new batch if there were at least 15 orders in the USA.

Alternatively, you can download the file here and print and paint it yourself.

https://cults3d.com/de/modell-3d/kunst/indiana-jones-pinball-ruin-flasher-mod