I also wanna join the club of the borken targets. I got a nice Indy 500, but of course the targets were broken. I created an easy fix for every one with a 3D printer. It's a "slip on" solution and you don't have to take off the target which is a pain in the ***.

you can dowload the *.stl file for the 3D printer here: http://uploaded.net/file/l63qtaki

Just cut down the rest of the broken target.
IMG_5324 - Kopie (resized).JPG

so it looks like this
IMG_5369 Kopie (resized).JPG

put a bit of glue on the marked positions
Schalthebel_1 - Kopie (resized).jpg

the printed part looks like this:
IMG_5364 (resized).JPG

IMG_5366 (resized).JPG

Schalthebel_3 (resized).jpg

Schalthebel_4 (resized).jpg

you can use it with the old PCBs but also with the ones from here: http://www.greatlakesmodular.com/index.html?http://www.greatlakesmodular.com/products/pinball/i500itb.html

So at the end it looks like this:
old print
IMG_5416 (resized).JPG
IMG_5413 (resized).JPG

new print
IMG_5321 (resized).JPG
IMG_5322 (resized).JPG

I just finished my little restoration (about 40-50hrs) of my Indy 500. It was in pretty good shape when i got it. Dirty but without major problems. Unfortunately the cab is pretty faded but nearly without any scratches. Will leave it with normal bulbs and no LEDs. It has a very warm golden shine which i like.

(too see sharp pictures click on them)

DSC08586 (resized).JPG
DSC08588 (resized).JPG
DSC08589 (resized).JPG
DSC08598 (resized).JPG

- everything cleaned
- playfield polish and waxed
- plastics polished and waxed (not one was broke)
- all ramps flame polished and waxed
- wetsanded the ball guides (what a f.. pain, takes forever (+10hrs))
- tumbled all screws and little metal parts
- turbo hole fixed
- new rubbers
- new coil sleeves
- new pinball assemblies
- etc

- it'll get new siderails and a new powder coated coindoor.

If someone needs a bit of inspiration to colorize the backbox. I just did mine like this:
IMG_7057 (resized).JPG

IMG_7055 (resized).JPG

IMG_7050 (resized).JPG

I also have a cliffy on my Indy 500 and no bounce outs, but my playfield is covered with a playfield protector. Maybe this changes the situation.

No shops are selling the left ramp. It's a shame.

PM sent.

For everyone. If you need the file i've done for the target fix just PM me and i send you the file FOR FREE! It was never the idea i ever sell my idea.

Uploaded my target fix solution here for everyone to download.

https://www.thingiverse.com/thing:3946367