Zaza would start with the 12Volt-regulated at testpoint TP3 on the powerdriverboard.
It should be exactly 12V at startup.
You're currently viewing posts by Pinsider zaza.
Click here to go back to viewing the entire thread.
Zaza would start with the 12Volt-regulated at testpoint TP3 on the powerdriverboard.
It should be exactly 12V at startup.
The 12V-reg seems ok.
The 10-optoboard can create strange readings in the switch matrix when the capacitor on this board is leaking. Just unplug J3 to exclude this.
Quoted from mikoz:4 boots with no issues!
That is great news, glad it solved the problem.
Quoted from mikoz:Is there a market for these old boards that need to be fixed?
The original boards can be fixed. You can keep them as spare parts or sell them when repaired.
You're currently viewing posts by Pinsider zaza.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/indiana-jones-williams-start-up-issue-?tu=zaza and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.