(Topic ID: 252612)

Indiana Jones (williams) Eternal Life light

By lostballchamp

2 years ago



Topic Stats

  • 8 posts
  • 4 Pinsiders participating
  • Latest reply 2 years ago by lostballchamp
  • No one calls this topic a favorite

You

Linked Games

Topic Gallery

View topic image gallery

eternal flash.jpg
49E00BEA-5360-41A8-8A91-45EC5EA211BA (resized).png

#1 2 years ago

Hello guys,
Can someone please send me a picture of the eternal life light from underneath the playfield ?
I just got the game,everything works except this light on the playfield.... Looking at it from underneath,
it only has 2 red/wires soldered to the same leg of the light... I know this can't be right and was hoping someone
could send me a picture of the wiring going to this light from underneath to help me figure it out....
Thank you !!
Johnny

#2 2 years ago

If it’s part of the lamp Matrix here is the wiring diagram.

49E00BEA-5360-41A8-8A91-45EC5EA211BA (resized).png
#3 2 years ago

Thank you,
Its actually in the flasher matrix, what im trying to find out is why there are 2 red/white wires on one lug and nothing on the other....
I was looking for the color wire that should be on the other lug... i have no loose wires around it , so i dont know where to start....
Thanks for your reply

#4 2 years ago
Quoted from lostballchamp:

I was looking for the color wire that should be on the other lug..

Usually blue with a white stripe.

LTG : )

#5 2 years ago
Quoted from LTG:

Usually blue with a white stripe.

Go to Tests - Flashers - stop on the one you want. Hit the start button. Then start hitting the "+" diagnostic button to step through flasher name, wire colors, connector info, fuse, and drive transistor.

LTG : )

#6 2 years ago
Quoted from lostballchamp:

I was looking for the color wire that should be on the other lug

blk-brn
eternal flash.jpg

Quoted from lostballchamp:

so i dont know where to start

Page 2-50, 2-51 and 3-7 in your manual for location, color and wiring

#7 2 years ago

Zaza your da man !!!!

#8 2 years ago

You are da man!!! I found the black/brown wire wrapped up in the harness, must have been off for a while.... soldered back on put new flasher in, and wall ah!!! Thank you so much for your help!!!
Je

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside