Just finished up my radcal install.
I had the start button alignment issues but Micro sent me an uncut replacement.
For button holes I used a drill bit. Then step bit. Finished with a dremel drum sander for a perfect circle.
Used the wet method and glad I did. Had a huge air bubble that was impossible to work out. Was able to pull the decal back off without losing any adhesive.
Hardest part was lining up the red/blue lines from the sides to the coin door.
6762C730-74F6-42CE-83B9-98091BEC6374 (resized).jpegA68AA49A-668D-4A95-8BE1-60E93A0F48C7 (resized).jpeg6F8D29AA-A77B-4DE1-8853-06B23DE9A0DC (resized).jpegF47EFEA5-2288-4095-9EB9-39906A044F36 (resized).jpeg9DAF7184-1F19-4B30-85F0-C270B98E2312 (resized).jpegD5F7D6FD-1228-4115-8DE5-397A13CB0961 (resized).jpeg0BE83597-AE03-4DD5-82E8-DE1258222D25 (resized).jpeg