These planes look awesome... I just found this thread tonight and read all 7 pages. I'm buried at work and couldn't get to my IJ till maybe next week
You're currently viewing posts by Pinsider Kerry_Richard.
Click here to go back to viewing the entire thread.
I'm anxious to see the planes installed soon, in the Batch #1 games!
Also, nice to see where wires are being routed and where the majority are placing them with which light source.
Great mods, for an amazing game!!!
Kerry (Batch #2)
Quoted from Cheeks:Personally I say charge everyone $15 for shipping if that covers your costs. If anyone is going to complain about you making an extra $2 or $3 margin for all the work you've put into these then they're as asshole.
I also totally agree with this.
Quoted from KornFreak28:New tension wire pattern
I prefer the X pattern from your other posts. That would be my choice.
Thanks for offering options
For me in Batch #2...
Fighter Plane:
1) If the "new" fighter plane already has the wing "notched out" under for guns... then, I'd prefer under the wing, at those locations.
2) Yellow nose cone only (not entire engine compartment)
3) Swazi sticker is OK w me
4) "Yes" Fighter pilot
Bi-Plane:
1) wire guides with thinner spacers I_X_(0)_X_I_
2) Wood prop with silver tips & silver nose
3) Landing gear
I too haven't rec'vd any bill for fighter plane gun lights. Was that to be included in your total, when planes were completed? I'm not clear on this.
Thanks again for all your efforts! It keeps getting better every week!
fighter plane (resized).pngKornFreak... Sorry, I was typing and composing the above email before you just posted yours above mine
Hey Guys... it was me in Batch #2, who yesterday, sent George the $$$ via PayPal and selected the wrong way to send it. My Bad!
George, again I'm sorry... I don't use PP and really didn't know there was a difference
Air-Brush is a nice tool. I used mine quite a bit. Last time: I didn't clean it well enough. It stopped working
I'm in on figures, for my Tiger Moth. I would also be interested in figure(s) in the "stock" bi-plane sent. Just waiting to know about cost.
Thanks guys!
Kerry / Batch 2
My preference to the wing lettering is to have it straight.
I've never noticed that in movie... but with as nice as these are, it would be the only thing I and my friends see that sticks out (Cock-eyed / crooked).
I'm in on the figures for the Tiger Moth. And, I'm in for the figures in my original bi-plane too.
Thanks guys... they look amazing. Nice touch for Indiana Jones pinball.
Kerry Richard (batch 2)
@Jazzbouche... that looks really good! It just adds a nice layer of Fun Factor, over the stock looking plane.
Thanks for sharing your picts.
Yes... I'm an idiot!!! I dropped my cutting pliers on the wing, just before cutting off the Zip-Tie tail
Fortunately, I have some quick dry glue that I just used to secure it back. I'm not touching it tonight tho... I'll wait till tomorrow to finish
IJ Fighter plane pict#1 (resized).jpgIJ fighter plane pict #2 (resized).jpgKornFreak28... I sent you a PM today. Wasn't sure if you got it, as you're usually so quick in responding.
Let me know.
Thanks!
Kerry
Quoted from underlord:Ah. The Tiger was the fighter, not the biplane. Idiot...yes.
Now I'm confused... the Tiger Moth is the upgraded bi-plane, not the fighter. Correct?
Quoted from KornFreak28:Yeah, I shipped Skyrex, Fytr, and ShepP’s Tiger sets this past Saturday. Next up are the last remaining Tiger set orders and then I get to work on Batch 3. I’ve already got most (if not all) orders prepped and painted. I’m currently on vacation with my Family until Friday. I’ll get back on the horse this weekend
Thanks KornFreak28 for the update... looking forward to my planes.
Enjoy your vacation with the family
Quoted from Soulrider911:Man I am counting the days until I get mine so cool
Me too! They look awesome.
Hello just a huge shout out to KornFreak28... Thank You!!!!
He spent a fair amount of time, on the phone w me today, texting pictures and instructions for proper installation of my planes.
Not only are his planes a 10+... he's very happy to assist in getting them in flight!
Thanks again!
Kerry
KornFreak28... I just added myself to your list, you good with that?
1: Jedimastermatt
2: frogger
3: vectron
4: Devo10
5: MacJedi
6: RGman
7: Inpw
8: orlandu81
9:kungen
10: Gunner
11. stuckey_t
12: FrankT
13: pingod
14: Vinnypin
15: Kerry_Richard
Hello Roland... nice to hear you're still out there!
I actually purchased another IJ a few days ago. It was from a local collector. He owned it for 19 years. He bought it from a home collector who owned it for 4 years. Only in arcade for about its first 4 years. Playfield is exceptionally nice!
I bought RadCals and plan on doing a restore on it. I'll blacken out all the armor too. Korn's planes are amazing! The Best Mods out there! Well you know, you got a set as well.
Kerry
I'm down for the complete sets: Tiger Moth w/ (2) pilots and fighter w/ pilot, both with spinning props.
KornFreak... You do amazing work
I've seen them in person... they're one of the BEST mods ever, compared to all mods on the market!
Full transparency... I have 2 sets of both KornFreak's planes, and have a 3rd set coming soon.
I reached out to Ricochet today, to make payment for the upgraded prop motor mod.
Anxious to get my KornFreak planes in my Indiana Jones.
Thanks
Kerry
Quoted from KornFreak28:Who here requested no red flag on their fighters?
Not me
You're currently viewing posts by Pinsider Kerry_Richard.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/indiana-jones-plane-rescue-service?tu=Kerry_Richard and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.