Machine looks Great.
How did the shaker motor work?
You're currently viewing posts by Pinsider tsunami.
Click here to go back to viewing the entire thread.
Quoted from eckelpeckel:stupid swordsman!! ...measured the switch chains from both J12 and J1 and they seem fine, J12 goes into IC U40 and this IC seems to only be used by swordsman and temple lock motor, however the temple lock works fine.. could it still be faulty? (i havent got an osilloscope so cant check its logic).
it seems it has to be some logic circuit since every voltage is fine and there and all switches involved work as they should..?
Where you able to fix the swordsman?
I noticed a single brown and a single purple wires that are coming from the top back box cluster that are not connected to anything. The purple wire has both connectors like the wire was ripped out, but I could not find the missing wire. Does anyone have the same wires on their machine?
Quoted from Spunky1562:The brown with grey stripe is your shaker motor wire if you choose to add it. I don’t see the stripe color on the purple. The manual
Is available online from Stern and you can double check there as well.
Thanks
Quoted from jake35:yes, it keeps wanting to move towards the lamp and not go back to the original position. it doesn't want to turn manually either although I barely attempted it as to not break anything.
I had the same thing happen and I thought it was the motor, the spring the opto, and wiring. I ended up removing the swordsman and putting 3 and 1 oil on the shaft and it has been working perfectly ever since. Cheap fix and I hope yours is the same.
You're currently viewing posts by Pinsider tsunami.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/indiana-jones-3?tu=tsunami and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.