You're currently viewing posts by Pinsider robknapp.
Click here to go back to viewing the entire thread.
STTNG is great for LED's ! Adding blue 906 Flashers in the Borg ship is very cool effect. There are many light sockets that will need a flexible LED due to the horizontal position.CoinTaker has them as well as The PinballCenter based in Germany. Please note: that to get to all the light sockets you must remove both left and right VUK and the under playfield ramps/diverters. I did not think I could do it. But I rolled up my sleeves and made it happen!!
One Note about LED's installed in Pinball Machines. Made by Bally or Williams. They all have attract mode settings for General Illumination for special effects during Attract Mode. If set to On you will get LED flicker in the Attract mode. I find this annoying. I set my machines to NO: Do Not dim the General Illumination. This setting can be found under A. ADJUSTMENTS MENU A.1 Standard Adjustments . Scroll to A.1 25 Allow Dim Illumination. Set to( No ). Page 1-26 in Operations Manual.
You're currently viewing posts by Pinsider robknapp.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/incandescent-or-leds?tu=robknapp and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Colorado Springs, CO