has anyone used a full Flipper Fidelity kit from a WPC 95 and installed into a Stern Spike 2?
You're currently viewing posts by Pinsider tilt-master.
Click here to go back to viewing the entire thread.
Quoted from hawknole:I installed the Goldwood LE cabinet speaker in my GZ Premium and the Kenwood’s with the SpaceCoast adapter in the backbox and then adjusted both speaker sets to the 4 ohm. While this is an improvement from the crap stock paper speakers in range, Godzilla needs more bass, even with tweaking the EQ. So my next step is to test my Infinity powered sub with a connection off the CN5. Looks like TinyBlackDog has provided the mouser links needed so ordering up.
I had a set of FF speakers that I put in my Rush. 4” 8 ohms in the backbox and an 8” 4 ohm in the cabinet. Again an improvement from the stock speakers. While Rush does not need the bass in my opinion like Godzilla does I will do CN5 plugs for both machines as I have a Polk powered sub available for testing.[quoted image]
Silly question, how did you mount the Goldwood LE speakers in the premium? The mounting on the premium is different
Quoted from davegauth:Pretty sure the mounting is the same. Stern only bolts the goldwood in utilising the same mounting that is in the pro and premium cabinets.
They are not the same.
Quoted from davegauth:Would love to know more about this and see sine pics showing the differences.
I'm guessing it's already been mentioned in the thread somewhere, an adapter is required, Spacecoast makes one:
You're currently viewing posts by Pinsider tilt-master.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/improving-sound-quality-the-diy-route?tu=tilt-master and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.