You're currently viewing posts by Pinsider phs4real.
Click here to go back to viewing the entire thread.
Quoted from livetowin:Bought a Pinsound cabinet speaker and the posts in the cabinet aren’t long enough to fasten the spacer down. Anyone have this issue?
I tapped the original bolts out then drilled approx 1/4" up from the bottom of cabinet and re installed the original bolts into the counter sunk hole. Worked great, no need to buy new bolts. Use a drill bit that is the same diameter or slightly larger than the head of the original bolts. Quick and easy.
Quoted from GCS2000:I have a new to me GZ Premium and would like to change out the speakers (doubt I will go amp tbh) and would like to move from the 4" stock to one of the recommended 5.25" sets. I know speakerlightkits.com has the adapters to do this but they are $50 is there a cheaper option out there?
Also I will be using the myth flaming speaker lights with city scape in my game and I understand clearance can be an issue on aftermarket speakers. Can anyone share which ones are good choice when using this light kit?
TIA
No adapter needed. I cut the studs off the original speaker plates and drilled 4 holes to mount new 5.25 kickers. I fastened the kickers with black pan head machine screws and nylon nuts. Works great with Flamin flames light kit, no clearance problems. Only cost $2 for hardware and was easy to do. Use the speakers as a template for hole locations.
You're currently viewing posts by Pinsider phs4real.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/improving-sound-quality-the-diy-route?tu=phs4real and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
