You're currently viewing posts by Pinsider noskills.
Click here to go back to viewing the entire thread.
Is this the right housing connector for a spike 2 sub? I want to be able to set up my speakers so they are super easy to swap in and out when I swap machines, so leaving the soldered wires on once I've done it once. Thanks
https://www.molex.com/molex/products/part-detail/crimp_housings/0039012020
If I replace the backbox and cab speakers with 4ohm ones but leave the factory amp in, is it better to change the settings to 4ohms or leave at 8? Spike 2 machine. Thanks.
Rookie question. How much extra depth does the sub need from the gasket/surround? I bought a cheaper sub which looks almost level with the gasket and now I'm not sure if it needs a spacer which might mean I just return it for a more expensive one with a deeper difference.
Or is the stl for a sub spacer still available? Thanks
You're currently viewing posts by Pinsider noskills.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/improving-sound-quality-the-diy-route?tu=noskills and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
