Swords of Fury
Williams, 1988You're currently viewing posts by Pinsider vid1900.
Click here to go back to viewing the entire thread.
Quoted from Nemesis:Also: How do I peel off the old scoring decals from the inserts?
Unless someone put some aftermarket decals on those inserts, those are not decals.
The numbers on the playfield inserts are normally silkscreened ink, not decals.
Close up pics, please.
Quoted from vulture:I'd like to strip the tops of the inserts down to bare plastic and add new decals. Is it possible to do this without removing the inserts from the playfield and sanding them, etc.?
Yep, no need to remove any inserts that are not broken.
Quoted from detroit_pinball:once you pull the mylar, you can just sand them they come right off.
I like to use a freshly sharpened chisel, completely vertically (not at an angle like you would shave wood). The ink and the clear coat easily comes right off.
Lay your first coat of clear, then apply water slide decals, then topcoat your clear.
You're currently viewing posts by Pinsider vid1900.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/im-a-very-proud-owner-2-of-a-huo-swords-of-fury?tu=vid1900 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Sana'a
Poland, OH