We have eventually finished a load of Illuminated Flipper Bats with remote control.
The Bats are equipted with RGB LEDs that can be control with the remote controll.

You can choose your color, red, blue, green, orange, violett and more.
It is also possible to let the bats change colors frequently through the range of colors.

Contents:

2 Illuminated Bats
2 x black rubber for the bats
1 x CPU
1 x receiver
1 x remote control
Power harness to be soldered to general illumination 6V AC
1 harness to connect receiver to the CPU.

The colors are much colorful than on the pictures,
I cant make decent pictures of the LED light.
It is possible to connect 4 bats.

The bat set will cost 110 Euro for US only.
If the remain in Europe EC it will be plus 19% VAT
Shipping world wide with airmail 6,50 Euro

Our Homepages will be uploaded in February. buthamburg.de
If you want to contact me, peter at buthamburg.de
Have a nice day.
Peter

IMG_6367.JPG

IMG_6278.JPG

IMG_6321.JPG

IMG_6333.JPG

They fit for Bally Williams Data East and Stern using the normal size bats.

My Home Pages will be going online in Feb again.

The plastic is not glued onto the shaft, the shaft is inserted into the injection molding tool,
then the plastic gets molded arround the shaft, such as the normal bats.
We have sold a couple of sets last year, upto now there is no problem with bats cracking or
shafts getting crushed.

Yes I can give a 6 months warranty

No, Thoose bats on the expo were samples we made. It took some time to get them ready for production. A new tool had to be build with clips for the LED PCB and a gate to block the hole in the shaft so the plastic wont be injected into the shaft. Rick received a bunch of raw bats and is working
on a version that will be incorparated into the games with color changes extra.

Yes, the bats can be purchased separetly as replacement. We also have bats with longer wires
for games with 3 bats like Getaway....

I have them on TOM and HS2, both with no rebuilt assemblies. Testing time over in TOM 12 months

If you like to order them, just send me a mail to peter (at) buthamburg.de
and we take it from there.

Replacement bat is 30 Euro

To order the Illuminated Bats just send an email to [email protected]
Yes they fit into Sega Pins aswell.

The power supply is the 6 Volt AC Gerneral Illumination.

The LEDs are mounted on a PCB that fits into the bat. The wires are running through the hollow shaft.
The wires are double protected with fiber isulation.

Hello to all.

We are now finally online. http://www.perfectplayfields.com/
It was a battle, not the solution we wanted, but now we are online with a few parts.
We will still need alot of hours to optimze all

Regards from Hamburg
Peter

Thank you.
Yes the price is horrible, I agree. There is to much hand work involved to get the bats and remote controll made.
It would be nice to get them made completly on an industry convayer method, but the quantities are just to low.
The first production run is sold out and we are buisy doing the second run now. I would love to put the price down
but it is just not possible.
Regards from Hamburg
Peter