You're currently viewing posts by Pinsider vec-tor.
Click here to go back to viewing the entire thread.
Quoted from PinballGalore:Connector j134 is occupied. (Not sure with what)
Where would the connector go? J133 is free but the connector doesn’t match the pins.
Thanks
[quoted image]
Lamp connectors:
J133 = playfield lamps
with
J137 = playfield lamps
-----------------
J134 = cabinet lamp
with
J136= cabinet lamp
----------------
J135 = speaker panel lamps
with
J138 = speaker panel lamps
Quoted from PinballGalore:Thank you. 135 is caught up. I’m not sure if it’s supposed to go elsewhere or the cable needs to find a different spot. Also, the connector isn’t in line with the pins on 135. Do you perhaps a photo of the board and the connections? Much appreciated. [quoted image]
The one connector that you have a picture of looks like the wrong style; for what
Williams has.
You might have to make an intermittent connector to fit the driver board.
Or, repin the wires to the correct connector required for the WPC system.
My fellow Pinsiders, please take time to check all the aux driver boards on
your Williams/Bally WPC system games. The Marcon filter radial capacitors
are at the end of life.
IMG_0001[1] (resized).JPG
This is the mini playfield Bridge driver board.
A-15946 although the board looked good,
the damage was hidden under the capacitor.
Quoted from DANGERTERROR:Thanks everyone for the diverter help — got a regular coil spring working and solved my overall issue - there’s two diverter plunger lengths and I had THE WRONG ONE. Argh.
Quoted from patje:Know I need a solution for the mode start hole, that the ball stay in when i shoot
the hole. Any suggestions?
I did a retrofit kit for a guy that had the problem with the eject hole ball settling issue.
It was several pieces of clear plastic spacers that sunk the base plate, the switch assembly,
the eject mechanical assembly along with the solenoid bracket.
In all, it seemed to work really good.
I would inquire about it.
You're currently viewing posts by Pinsider vec-tor.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/ij-williams-you-cheat-dr-jones-club?tu=vec-tor and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.