Hi all,

New IJ owner. Great pin! I have read about a lot of trouble with the PoA. Mine is working fine, but I wanted to replace the inserts bulbs underneath with LEDs. I did the rest of the inserts on the playfield, but I am leary of doing the PoA. I see the steps in the manual to remove it. My question is whether it is worth removing and potentially having issues caused by messing with it or is it no big deal? Suggestions?

Thanks

Thanks. I was just playing some and I think I have another issue. When locking balling, it seems the idol will release a ball and then another ball comes out from the trough. I get too many balls in play and the game gets confused. Thoughts? Idol test using maintenance menu shows no issue. Is this a trough issue likely or idol optical problem?

I am also interested in cabinet decals.

The larger board is the Jackpot board for the back box display panel. The smaller board is the lost plastic light board.

Jackpot board: One should go to J133/J134/J135 (Lamp Rows) and the other to J137/J138 (Lamp Columns.) Doesn't matter which one you choose, they are on the same circuit. Just pick the one that is empty.

J133-J135 is a 0.100 inch connector; J136-J138 is a 0.156 inch connector.

I don't have the lost plastic board, so I cannot help you there.

I did a search for you. I cannot confirm, but:

Lost plastic: The lost plastic lighting simply ties into the orange and orange/white General
Illumination circuit.

You can probably find a GI socket you can connect to it or stuff the included wires into slots in the IDC connector at location J120 on the power driver board.

Good luck.

FS: New set of IJ cabinet decals I bought and never installed in the marketplace. I originally purchased them from Bay Area Amusements.

https://pinside.com/pinball/market/ad/28668