Hi All

Just joined the club and still getting to know this fantastic machine!

2014-10-15 21.33.11.jpg

Hi All,

Couple of questions regarding my new IJ. Firstly, it doesn't have any override switch to turn off the higher powered circuits when the door is opened. I haven't been able to track down the exact part as per the part number but would this work?

http://www.marcospecialties.com/pinball-parts/22-0746-1

2014-10-23 20.32.10.jpg

Second question....

Only had the pin for a week but twice, in the middle of the game the machine has simply rebooted. I take it this is not normal . Nothing coming up as an error. Any clue where to look for the root cause?

Thanks !

Thanks Nik - you are right this machine is plugged into an extension cord. So the solution I guess is just to plug it directly to the wall....

I removed the extension lead, and plugged it straight into the wall socket but no luck. I can 100% reproduce the issue of the resets if I put the table in switch test mode and activate both flippers. It will reset most of the time .

I'll take a look at J101 and J114 - maybe they are loose from the relocation. Failing that its over to the guide bdaily posted. Had a read through and this is all new territory to me.

Reseated J101 and J114 as recommended and tested it again. This time it didn't reset!!! They both looked properly connected but I removed and replugged to be sure. A bit too late to do proper testing as I don't want to wake anyone up but will try tomorrow.

Thanks!

Yes, 220v over here. I've read through that guide and will start working through it. Will be a learning curve for me. How hard is it to replace those connectors?

Does anyone have a list of how many of each type of LEDS are required to go from regular bulbs to LED? thanks.

Thanks Nik, TrainH2o - that is very useful!

Sorry, one further question - Nik - where did you order those from?

Would you mind to share them with me too?

Thanks.