Quoted from beltking:Anyone have a pic of wiring for green super ball button?
Check out post #7619 on this thread by @davi. Or you can remove the ceramic resistor and install a 12v bulb like I did.
You're currently viewing posts by Pinsider EStroh.
Click here to go back to viewing the entire thread.
Quoted from beltking:Anyone have a pic of wiring for green super ball button?
Check out post #7619 on this thread by @davi. Or you can remove the ceramic resistor and install a 12v bulb like I did.
Quoted from SiN13:While we are on the topic of the super ball button, the start and super ball button lamps are the last 2 I haven't replaced with LEDs. I initially made an attempt on the start button not fully knowing how it comes apart and stopped myself for fear of breaking something. Any tips on getting at these bulbs?
It's very easy, except some of the switch / lamp portions of the buttons twist out (counterclockwise) and some just snap in and out. I don't recall which was in my IJ, but I put LED's in both buttons. Not all LED's fit though, the diameter of the bulb hole is fairly small. PBL carries bulbs specifically for this: https://www.pinballlife.com/ablaze-3-led-slim-wedge-body.html
Quoted from radium:Does anyone know what 01-11669 "brkt switch deflect" might be? It is part of the metal bridge assembly.
[quoted image]
I believe I do. It's a small bracket that protects the switch terminals. I'll try and get a photo of it Monday for you.
Quoted from subedriver:I seems like it has enough clearance. It's definitely not a wiring issue. If it gets hung up I can push it down by hand and then it'll work again. The plunger isn't scored or have grooves for it to catch on either. I'm going to round the edges of the gate and see what happens
Does the plunger seem to move freely in the coil sleeve?
You're currently viewing posts by Pinsider EStroh.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/ij-williams-you-cheat-dr-jones-club?tu=EStroh and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.