Quoted from KornFreak28:Lior, if you ever make the Bi-plane, sign me up!!!!
yes but its will take time you did a great job!
Quoted from KornFreak28:Lior, if you ever make the Bi-plane, sign me up!!!!
yes but its will take time you did a great job!
Quoted from liorillusion:yes but its will take time you did a great job!
Thanks Lior! I'll be selling this one whenever you get the Bi-plane done. No rush tho
Quoted from KornFreak28:Thanks Lior! I'll be selling this one whenever you get the Bi-plane done. No rush tho
apron and mini pf will be asap bi plane after
Quoted from KornFreak28:Also working on the stone for this Idol! Carving a piece of wood with the dremmel. Painting and some moss is next! I happen to have the replica to serve as a guide
This is cool. How big it is?
Quoted from Davi:This is cool. How big it is?
I’ll measure it when I get home but it’s about 1 or 2 inches or so. I will use double sided tape and put it on the clear insert in the left rear corner just before the POA. I will add some moss and a spot light that will light up during the Idol mod or during the entire game. Not sure yet
Quoted from KornFreak28:I’ll measure it when I get home but it’s about 1 or 2 inches or so. I will use double sided tape and put it on the clear insert in the left rear corner just before the POA. I will add some moss and a spot light that will light up during the Idol mod or during the entire game. Not sure yet
you cant put it there you have my ramp.... you forgot? hahah
Quoted from liorillusion:you cant put it there you have my ramp.... you forgot? hahah
I guess I did...... LOL
Alright I am having a issue with my diverter on the right ramp. Installed a new coil that was cooked and my tech guy checked the transistor that activated it and said it was good too, but clearly it can't be because the coil is getting super hot again. Could someone take a picture of the coil for me? I think something mechanically is wrong too, but I need a good picture to figured it out. Thanks!
Quoted from pacman11:Alright I am having a issue with my diverter on the right ramp. Installed a new coil that was cooked and my tech guy checked the transistor that activated it and said it was good too, but clearly it can't be because the coil is getting super hot again. Could someone take a picture of the coil for me? I think something mechanically is wrong too, but I need a good picture to figured it out. Thanks!
Thanks for the coil picture, What does the other side look like with the spring and shaft? I think mine is put together wrong.
Quoted from pacman11:Thanks for the coil picture, What does the other side look like with the spring and shaft? I think mine is put together wrong.
Sorry I don’t have a pic of that area. My machine is being restored I’m still putting it back together
First what I see on the picture above is that the wiring at the coil is ok.
Here's all the mechanic of the diverter assembly - hope it helps?
Take a closer look to the two screws, they have to be fixed with glue.
And take care that the pivot doesn't collide to the plastic or ramp and don't use lubricant anywhere!
Hi Guys,
A friend of mine has an issue with the mini playfield. The ball never drops on the right side, always on the left... so he is enable to pass on the first switch on the right side.
And when the ball pass on the left side, it seems that the mini playfield dos not go deep enought down on the left and the ball systematicly drops on the first hole...so in play, we never cross the all mini playfield, we always lost the ball quickly...
There nothing that block the mini playfield and we tested the motor which looks fine... so if you have any suggestiosns, they are welcome, thanks.
Quoted from Averell:First what I see on the picture above is that the wiring at the coil is ok.
Here's all the mechanic of the diverter assembly - hope it helps?
Take a closer look to the two screws, they have to be fixed with glue.
And take care that the pivot doesn't collide to the plastic or ramp and don't use lubricant anywhere!
Why must they be fixed with glue? I can still go back and add glue if really necessary
Quoted from lanfeust:Hi Guys,
A friend of mine has an issue with the mini playfield. The ball never drops on the right side, always on the left... so he is enable to pass on the first switch on the right side.
And when the ball pass on the left side, it seems that the mini playfield dos not go deep enought down on the left and the ball systematicly drops on the first hole...so in play, we never cross the all mini playfield, we always lost the ball quickly...
There nothing that block the mini playfield and we tested the motor which looks fine... so if you have any suggestiosns, they are welcome, thanks.
My experience has been if the set screw which locks the mini playfield onto the motor shaft becomes a little loose then the mini playfield does not tilt fully and I have had some of the problems you described.
With regard to the ball constantly dropping to one side I have found it beneficial to loosen the set screw and make sure the mini play field is pushed gently forward towards the front of the pinball machine then tighten the set screw very firmly. Also do not be afraid to "slightly" bend the little tabs that the ball passes between as it drops from the hold position on to the mini playfield. With a little testing you can find a happy spot so the ball can be directed to either side.
thanks freegame450.
We checked the screw which was a little loose, we push the mini playfield and tighen the screw.
It's a little bite better on the left side, but on the right side there is no improvment, I mean, the red plastic drives directly the ball to the first hole. Looks like the M.P does not lean enought on the right side, so I am wondering if the motor is strengh enought... maybe it's time to change it.
Lanfeust - I doubt its a motor strength issue. Make sure you have the flat washer on the shaft - refer to the manual, page 2-37. It sits between the playfield and E clip.
It takes some playing around to get the playfield set correctly. Make sure the screw to the motor shaft is not going back into an old hole - especially if people have been playing with this for some time. Also check to make sure everything moves freely before tightening the screw to the motor shaft - you want to make sure something is not binding.
There has been lots of discussion on this string about getting the playfield to move correctly - I'm sure the answer for your problem is in one of these posts. Good Luck
Quoted from Averell:First what I see on the picture above is that the wiring at the coil is ok.
Here's all the mechanic of the diverter assembly - hope it helps?
Take a closer look to the two screws, they have to be fixed with glue.
And take care that the pivot doesn't collide to the plastic or ramp and don't use lubricant anywhere!
Thanks a lot! That should help me..
Now working on the fighter plane! Still not done painting and the wings still need to be attached, but the spinning prop is looking good! I used a black prop and painted the tips yellow. I painted the plane in two tones of green like the plane in the movie.
This one was much more difficult than the Bi-plane since there’s very little room to work with. Wasn’t really sure how it would turn out so this was just my “test” plane. I’ll finish this one and then work on my final plane next!
C51CD67F-89DD-4B77-AC92-85952AE71C68 (resized).jpeg
B28BEEC4-FB18-4FF1-8940-197E8BE2F244 (resized).jpeg
Quoted from KornFreak28:Now working on the fighter plane! Still not done painting and the wings still need to be attached, but the spinning prop is looking good! I used a black prop and painted the tips yellow. I painted the plane in two tones of green like the plane in the movie.
This one was much more difficult than the Bi-plane since there’s very little room to work with. So I made this my “test” plane thinking It wasn’t going to work but apparently I was wrong! Working on my final plane next!
Looking pretty good! Is that a model or die-cast?
Quoted from Rdoyle1978:Looking pretty good! Is that a model or die-cast?
Thanks! It's model. I found it thanks to Lior who provided the link for it a while back. I would provide it, but I can't find it at the moment. The plane will also accommodate the original board and wiring. I'll post pics later
Quoted from KornFreak28:Thanks! It's model. I found it thanks to Lior who provided the link for it a while back. I would provide it, but I can't find it at the moment. The plane will also accommodate the original board and wiring. I'll post pics later
That was the link:
Temporarily sold out. You can click on it, and find pictures.
Quoted from Davi:That was the link:
https://pinside.com/pinball/forum/topic/new-work-in-progress-indiana-jones-ramp-cover-mod/page/2#post-3929759
Temporarily sold out. You can click on it, and find pictures.
Thanks!
Almost done with it. I added a cone-shaped nose to the propeller for a more realistic look. The board is currently installed on my keeper plane but here's a picture of how I installed it and how the wires are concealed.
Yes, I know the brakcet that holds the plane goes on the inside but there is very little room to work with. I guess It could be installed on the inside but I just don’t see the need. Plus, it really doesn’t matter as long as it holds the plane and you can’t really see it when playing the game. Keeper plane is also getting a spinning prop and paint job!
38877A80-6C2E-4EA5-9DFA-B33EE84485A4 (resized).jpeg
6E259437-B9C5-478C-AFF5-5799B46FE58C (resized).jpeg
E0BC67A2-877E-4CEB-A431-B323A1D9F0C1 (resized).jpeg
Quoted from kapsreiter:PMM Pinball Movie Mod for Indy
» YouTube video
Looks killer. Are these available?
Quoted from Guzz4851:Hello,
If anyone is using the NEW Pinsound Plus board with their IJ, please contact me. I have a few questions and do not want to clog this thread with the details. Again, only the newer board with this game. Thank you.
Pm sent
Quoted from Guzz4851:Hello,
If anyone is using the NEW Pinsound Plus board with their IJ, please contact me. I have a few questions and do not want to clog this thread with the details. Again, only the newer board with this game. Thank you.
I’m curious about what questions you have
Quoted from Rdoyle1978:I’m curious about what questions you have
Me too. I bought a board a couple months ago I didn't know there were different ones.how can I tell Which one I have?
Quoted from tonycip:Me too. I bought a board a couple months ago I didn't know there were different ones.how can I tell Which one I have?
If you bought it a couple months ago you have the original one. Make sure your firmware is up to date; the new board has a couple of new things but it generally works the same as the new one, no need to uograde
Selling an awesome IJ LED Lighted Topper. High quality, made of metal. Send me a message if interested.
https://pinside.com/pinball/market/classifieds/ad/61818
0C1216EE-4685-47F1-8CBA-03C5ECF576DE (resized).jpeg
E94D2613-E324-4D1D-9A05-73AAD0AC9D77 (resized).jpeg
Ark of the Covenant Replica Medium https://www.amazon.com/dp/B004QP3N2M/ref=cm_sw_r_cp_api_vOcVAbY858ZR3
Large Ark of The Covenant on Copper Base by Zuluf HLG009 https://www.amazon.com/dp/B01L5CSZKI/ref=cm_sw_r_cp_api_pPcVAbRWA59G6
Quoted from knockerlover:Ark of the Covenant Replica Medium amazon.com link »
Large Ark of The Covenant on Copper Base by Zuluf HLG009 amazon.com link »
Doesn’t include a lighting kit.
Quoted from Davi:Hello Guys,
**** This is the confirmed list about Jackpot Board, thanks for quick and prompt feedback ***
Psw757 - original
TractorDoc - upgraded
MikeHogue - upgraded
Tonycip - upgraded
jamesmc - original
Konajack - upgraded
Ericpinballfan - upgraded
Not confirmed (earlier intested, but no confirmation via PM):
Pinballinreno
Grumpy712
Rdoyle1978
Matt-Man
Jake35
Mix_arcade
I will wait for 2 more days, PM me if your are really interested, then I'll look for raw panels based on confirmed list (not more, not less).
Did anything ever happen with this? Davi did you find a supplier?
Quoted from Davi:Hello Guys,
**** This is the confirmed list about Jackpot Board, thanks for quick and prompt feedback ***
Psw757 - original
TractorDoc - upgraded
MikeHogue - upgraded
Tonycip - upgraded
jamesmc - original
Konajack - upgraded
Ericpinballfan - upgraded
Not confirmed (earlier intested, but no confirmation via PM):
Pinballinreno
Grumpy712
Rdoyle1978
Matt-Man
Jake35
Mix_arcade
I will wait for 2 more days, PM me if your are really interested, then I'll look for raw panels based on confirmed list (not more, not less).
Curious as well. Any updates Davi?
Quoted from Rdoyle1978:Did anything ever happen with this? Davi did you find a supplier?
Hello,
I have 3 upgraded raw panel (ready to cut jackpot shapes), and 9 request:
Psw757 - original
TractorDoc - upgraded
MikeHogue - upgraded
Tonycip - upgraded
Konajack - upgraded
Ericpinballfan - upgraded
ck1sport - upgraded
Rdoyle1978 - upgraded
Konajack - upgraded
I have to receive 6 more panels. The supply is very slow, this is not his main profile... Once I have a confirmation about estimated time of arrival, I will contact all of you about a small deposit.
I hope you guys can wait, it makes sense to do it at once and send as one package.
Can anyone tell me what hitting the 'Special' in the outlanes awards you? I understand that it is lit after 6 hits on the captive ball during the Quick 2 Ball Multiball.
Quoted from Davi:Hello,
I have 3 upgraded raw panel (ready to cut jackpot shapes), and 9 request:
Psw757 - original
TractorDoc - upgraded
MikeHogue - upgraded
Tonycip - upgraded
Konajack - upgraded
Ericpinballfan - upgraded
ck1sport - upgraded
Rdoyle1978 - upgraded
Konajack - upgraded
I have to receive 6 more panels. The supply is very slow, this is not his main profile... Once I have a confirmation about estimated time of arrival, I will contact all of you about a small deposit.
I hope you guys can wait, it makes sense to do it at once and send as one package.
Add me to the list please!
If it's not too late...
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/ij-williams-you-cheat-dr-jones-club/page/60?hl=fremen and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.