When in doubt reseat all roms and cables to start with then check voltages and fuses if no change.
You're currently viewing posts by Pinsider WW2GURU.
Click here to go back to viewing the entire thread.
Are all your power driver board LEDs lit? in your picture it looks like LED7 isn't lit, 12volts I believe. Verifying the voltages at the TP (test point) pins is an absolute must. I believe there are 7. If that LED is off you have to start there and find out why that voltage line is down. The LEDs on the CPU board look good, one should be flashing if its ok. No idea if your dip switch settings on that CPU board are correct tho, might want to verify that to eliminate it.
Another thing you can do is boot the game with the DMD and sound board disconnected to see if it will play at all.
Check out this thread as it relates to LED 7 on a WPC89 board
https://pinside.com/pinball/forum/topic/tech-wpc89-driver-board-check-fuses-115-116-j112-12v-supply
You're currently viewing posts by Pinsider WW2GURU.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/ij-pinball-adv-not-waking-up?tu=WW2GURU and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.