Indiana Jones
Stern, 2008
Indiana Jones: The Pinball Adventure
Williams, 1993error single drop bad
when i turn on the game the totem drop target fires 4 times in a row.
the switch is good in test mode as well as i have tested the coil and they seem to be functioning correctly.
I was hoping to get a pic of the switch that trips when the totem drops.. one of the switch wires came off and i believe reconnected to the proper place but know Im not sure
Bad switch? Also, is that screw in the bottom of the drop supposed to stick out that far or maybe it was replaced with a longer one? Just wondering.....
I think i had this same problem and it was that the plastic drop target was too worn out. Everything with the coil was absolutely fine but when it tried to pop it up, it wouldn't catch on the ledge anymore and stay up. After so many tries it gives up / Errors out. Fresh drop target fixed it right up.
Quoted from smokey_789:Bad switch? Also, is that screw in the bottom of the drop supposed to stick out that far or maybe it was replaced with a longer one? Just wondering.....
It depends on your drop targets. I got replacements for the 3 bank assembly and had to run the set screw out a bit compared to the old ones.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/ij-help-please-3 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Portland, OR