Turned on my IJ this morning and was met with disappointment.

None of the solenoids were firing. No ball launch. No ball popper. No drop targets...etc.

"Narrowed" it down to all the high voltage items. I reseated the connectors: nothing. Checked for popped fuses: nothing.

What's the next step?

A pinball friend of mine said it's probably the 50v (Bridge Rectifer & Cap)...but I don't quite know what this means...errrr!

Thanks for the help!

Oh, none of them had popped on any of the boards...is that the right way?

Negative on the meter. What do I need to buy/do?

I completely lack the knowledge when it comes to any of this. When you say open...you mean no power right?

Are high voltage fuses located in the backbox or the little fusebox on the bottom of the cabinet?

Seems like the fuses are ok.

Possible dead 50v?

I've looked through the manual - can't find where it's located/what I need to check for a dead 50v

shameless selfbump in hopes of saving money

Fixed and back in order! Turned out to be a old and defective BR3. 50v boys - you got it.

Big thanks to Jack again for saving my @$$. Indy is back!