Ice Cold Beer (ICB) Owner's Thread

I have an Ice Cold Beer and the much rarer Zeke's Peak. Both are in brand new beautiful real wood cabinets with all new t moulding, control panel overlays, side art. Both cabinets were stained and sealed not painted. The ICB also has brand new playfield glass as well. Two of the sweetest in existence. I value them at $3900 each and would be interested in trades for pinball or rare arcades.

IMG_5083 (resized).jpg

IMG_5084 (resized).jpg

IMG_5085 (resized).jpg

IMG_5086 (resized).jpg

IMG_5087 (resized).jpg

IMG_5088 (resized).jpg

IMG_5089 (resized).jpg

IMG_5089 2 (resized).jpg

IMG_5090 (resized).jpg

IMG_5091 (resized).jpg

IMG_5094 (resized).jpg

IMG_5097 (resized).jpg

IMG_5098 (resized).jpg

IMG_5099 (resized).jpg

IMG_5100 (resized).jpg

IMG_5101 (resized).jpg

You want these: https://www.chompingquarters.com/store.php/products/ice-cold-beer-control-panel-overlay

Unfortunately out of stock right now. Not sure how the ones on Ebay are but the one above is made by This Old Game who makes top notch stuff!

These have been traded...

No I did not... They were posted here and several other places. I've donated my share here over the years. Hope you have too!

I know some of these ICB's and Zeke's were parted out due to crappy cabinets... does anyone have a power brick for one of these? Or a wiring harness?

Thanks! I never thought to look there.

Turns out I still need the original power brick to use this power supply kit...

I just talked to Steve at Arcade Shop and here's what he told me: "after looking at the manual the power supply kit provides all the voltages needed including the 24 volts for the solenoid. You would just have to run something to the fluorescent light."

So he seems a little unsure because he originally told me that the original power brick is still needed but now after he did a little research he is thinking his kit will take care of everything. Let me know if it works for you.

Lol, I thought the same thing!

I sent a message to Steve at Arcade Shop to see if he can send me the instruction manual via email. I'll post if I get it.

Possibly can bring to Allentown...

Restored Ice Cold Beer with new stained and sealed wood cabinet. New art, control panel overlay, glass... beautiful!

Also have a super nice original Zeke's Peak. All original and way too nice to replace anything.

Looking for trades mostly... pinball or rare vids.

IMG_5077 (resized).jpg

IMG_5097 (resized).jpg

The switcher from Arcade Shop works great and completely replaces the original linear power supply.

It is to be soldered directly to your board at the +5 test point. Or you can change the jumpers on the power supply instead and ignore that wire. I didn't use it. I decided to change the jumpers on the PS.

https://www.szabosarcades.com/search?type=product&q=zeke%27s

I sold a ZP in really nice original condition for $3400 last year.

https://pinside.com/pinball/market/classifieds/ad/86790

ICB has been traded and I am keeping ZP! Thanks

Not sure why anyone would clear coat the playfield. The ball barely touches the playfield. That would definitely be overkill!

Both readily available...

Contact Paul at VirtuaPin. Not sure if he has them is stock right now but he builds them.

https://virtuapin.net/index.php?main_page=index&manufacturers_id=1

And the linear power supply can be replaced by this:

http://www.arcadeshop.com/i/1182/taito-ice-cold-beer-zekes-peak-power-supply-kit.htm

If you list it for $2500 it will be gone in minutes.

That's about $3100 so that's a great deal!