(Topic ID: 185732)

Ice Cold Beer (ICB) Owner's Thread

By T-800

3 years ago

Topic Stats

  • 437 posts
  • 97 Pinsiders participating
  • Latest reply 4 days ago by pinmister
  • Topic is favorited by 52 Pinsiders


Linked Games

No games have been linked to this topic.

    Topic Gallery

    There have been 105 images uploaded to this topic. (View topic image gallery).

    20201230_183939 (resized).jpg
    20201121_133346 (resized).jpg
    20201121_125454 (resized).jpg
    DB4E3B55-5432-4F79-B746-7FACEE3AF433 (resized).jpeg
    20201027_092539 (resized).jpg
    16B1C419-2C2F-4E8B-996E-747271A7B808 (resized).jpeg
    6B2CAC99-7267-4A43-81C9-FC007A370843 (resized).jpeg
    E507C09A-0959-4B2F-B9A7-F4E02D3B69BA (resized).jpeg
    0DF449D2-CB0D-4FE6-97D1-6DD50094118B (resized).jpeg
    1A20922C-7599-4ECE-8406-61F5530CCE37 (resized).jpeg
    F4D847E8-94F1-4902-950B-C5C14AB24B54 (resized).jpeg
    E4050AEE-B309-498E-A9F3-B352C5A1409B (resized).jpeg
    8DDA9EF4-11E9-48E1-B2EA-49EA89C6DEEF (resized).jpeg
    47703E73-5806-464A-8A10-F90C797F004D (resized).jpeg
    15100FFF-F9BE-4135-98B8-AB887C29AAFF (resized).jpeg
    498CEF15-4FD8-4813-B623-4D986A5138F5 (resized).jpeg

    You're currently viewing posts by Pinsider skyemont.
    Click here to go back to viewing the entire thread.

    #134 1 year ago

    Question ICB owners. Yesterday playing my ice cold beer the bar stopped moving. The belts are fine. The ball will go in hole one, the bar will return to get the ball and then stop. The bar will not move. If i cut the game off, it will move to find the ball and get it ready for a game.

    #136 1 year ago
    Quoted from T-800:

    Did you check the switch connections at both the sticks and the board? Check the boards to make sure the switch logic components are still good?

    I got it. The belt switch at the bottom left was not registering.

    2 weeks later
    #142 1 year ago
    20190405_190948 (resized).jpg
    5 months later
    #175 1 year ago
    Quoted from benbjerke:

    I would looooove to buy one of these. We're an arcade in Sandpoint, Idaho and looking to add one into Coeur d'Alene. This (and Zeke's Peak) would make an awesome addition! If you have one and are willing to sell, let me know! Ben

    Whats your price range?

    #184 1 year ago

    It says unsold on Ebay!

    #187 1 year ago
    Quoted from gliebig:

    I'd sell mine for $4k.

    Me 2. I have the Taito version.

    #192 1 year ago
    Quoted from OLDPINGUY:

    Here you go $5K Now.....so If this sells are all the $4K now cheap? CrazY!
    ebay.com link[quoted image]

    Quoted from jcar302:

    For 5 grand I'd at least expect some type of effort to take better pics and give a description.

    It’s mine. Trying to see if anyone buys it.

    #196 1 year ago
    Quoted from brainmegaphone:

    Zeke’s Peak for $1800? I’ll take three please.
    The market is closer to $3k+ on these like it or not. Even the $2500 is cheap. ICB is more common and sells in the $3k range.

    I totally agree. At 3k they sell quickly. Tatio version is a 3k plus game.

    #201 1 year ago
    Quoted from jcar302:

    I've had serious offers of 3k from people picking up other games. Tempting, but i doubt it would be easy or cheap to find another one. I'm also not one of the people that got it really cheap. So a small profit isn't motivation to sell it.

    Exactly my point. I had a 3k offer yesterday. Part of me says do it and part of me says its not easy to find and you probably will never get one again.

    1 month later
    #250 1 year ago

    Yikes meaning?

    #252 1 year ago
    Quoted from Wharhed:

    An unrestored ICB being a $3500 game

    I had 3 offers for mine at 3500. Not restored. Supply and Demand sets pricing. Maybe not for you but for those who want it bad enough.

    #262 1 year ago

    I’m in the market for a Wonka but no cash involved.

    1 month later
    #277 11 months ago
    Quoted from Herk:

    I picked up a ICB last night. It had been sitting in a warehouse for years.
    The first time I plugged it in it fired right up but the right side of the rod didn’t move so I turned it off and found the belt had dry rotted and broke. I ordered a new set of belts last night so no biggie.
    However, after I turned it back on I’m no longer getting any displays and even though it will coin up it won’t start a game. Anyone have any ideas where to look first?[quoted image]

    Good find. It’s a great game.

    2 months later
    #310 9 months ago
    Quoted from Trizel:

    Is anyone selling or know of an ice cold beer arcade being sold? Please pm me.

    What pinballs do u have? Anything to trade?

    #311 9 months ago
    07E8B200-C2F0-45A9-AA58-004A7556FA5F (resized).jpeg
    3 weeks later
    #313 8 months ago

    Looking to trade my Congo for a ICB by Tatio. PM me if interested. Must be with in driving distance of Richmond VA

    1 week later
    #314 8 months ago

    Where can I order belts for this piece of crap?

    FB68BB2D-71EF-487D-8CED-8D5E2A0F0C0A (resized).jpeg
    2 weeks later
    #320 8 months ago
    Quoted from Sunny1989:

    I just listed mine at $3500
    [quoted image]

    This should sell quick.

    2 weeks later
    #340 7 months ago
    Quoted from Waldo:

    Well they are extremely fun and still one of the most played games in my entire arcade, so there is a lot of value in that.[quoted image]

    Exactly. I love my ICB and Zekes Peak.

    #342 7 months ago

    Anyone have a website to order switches and parts for ICB and ZP?

    #346 7 months ago
    Quoted from Coindork:

    Which switches and parts are you looking for?
    The micro switches in the back for up down? Ball return?
    I’ve found that parts for this are more readily available on arcade sites rather than pinball sites.
    The switches probably won’t be tagged as ICB specific on those sites, just suitable replacement for part number.

    The motor switch. Zekes Peak artwork. Not just the side art. But with wood grain part as well.

    #348 7 months ago
    Quoted from pfinny:

    They are not rare they made a lot of them, back in the 90,s a lot of them probably went to the landfill nobody wanted them was lucky to get 200.00 for them at a game auction back then it wasn’t until pinball started getting popular that prices shot up on them when demand started going up the supply wasn’t there since a lot of them got trashed 10 to 15 yearsearlier

    Do you own one?

    #353 7 months ago
    Quoted from Coindork:

    I’m not sure where you would get new repro art to restore a Zeke’s Peak.
    I just looked at all the normal arcade art sites like Phoenixarcade, thisoldgame and escapepod and none seem to sell it.
    You might have to scan it and clean it up in photoshop if no one prints it.
    If you do that sites like escape pod or game on graphics will print them for you. It won’t be screen printed, but it’s better than nothing and not bad. Also if you do that, make sure you supply them with exact measurements for when they print the files or it may not be one to one.
    As far as the wood grain goes, most people just use wood grain laminate.
    Same goes for things like cabarets and early black and white arcade games with wood grain sides. Just find a grain pattern that closely resembles what’s on the actual cab.
    I think ZP is probably rarer than ICB by about 10-1 which is probably why the normal repro art places haven’t done the art yet, because the demand probably isn’t big enough.


    #354 7 months ago
    Quoted from Coindork:

    Nice, I didn’t check eBay.
    Here’s a link to where you can buy the display plastic.


    #356 7 months ago
    Quoted from visi0n:

    Does anyone happen to have a lead on an ICB or Zeke's Peak main PCB? I came into a game with a pretty decent cabinet but it looks to have been partially picked through. I got it running with a loaner PCB but I'm going to need to return the loaner soon and find a permanent solution.

    I can fix your board if it has one.

    #360 7 months ago

    Where can I get a ballast for both my ICB and Zekes? Home Depot does not carry it.

    47703E73-5806-464A-8A10-F90C797F004D (resized).jpeg
    #362 7 months ago
    Quoted from jcar302:

    I'm a electrical contractor.
    Buy a direct wire 120v bulb and bypass the ballast. It's easier to install, runs cooler and will last forever.

    Sweet. Good call.

    1 month later
    #367 6 months ago
    Quoted from jfrazie:

    Anyone have a Zeke’s peak within 6 hours of Illinois? Not looking for ICB.
    Have multiple pins/arcades for trade. Cash OK too!

    You should list your pinballs for trade.

    1 month later
    #373 4 months ago
    Quoted from T-800:

    Selling my Taito Ice Cold Beer if anyone is interested. Game works 100%. Cabinet is decent. Also have new cabinet and control panel decals, TILT/score plate, new backglass, and other ICB items available for sale as well. Local pick-up only.

    What’s the price?

    #374 4 months ago
    Quoted from Flash319:

    If anyone is interested I have started producing replacement play-fields. These will fit the original components. Made from 3/4 Mdf like original. $249 Cad + shipping.
    New full cabinet coming soon![quoted image][quoted image][quoted image][quoted image][quoted image]

    Very nice. Will the playfield have the artwork?

    4 weeks later
    #382 4 months ago

    Any ICB’s for sale? I’m ready to buy!

    1 week later
    #389 3 months ago

    Taito Ice Cold Beer Reproduction Playfield Plastic Insert. $100 shipped. PM me for questions.

    6B2CAC99-7267-4A43-81C9-FC007A370843 (resized).jpegE507C09A-0959-4B2F-B9A7-F4E02D3B69BA (resized).jpeg
    1 month later
    #399 68 days ago
    Quoted from djblouw:

    Thanks for the input. Anyone else have thought on pricing?

    A friend just sold a Zekes Peak which is the same thing basically for $3,900

    #405 66 days ago
    Quoted from djblouw:

    Thanks for this.
    So if I list it (or trade it) for 2500-2800 it seems reasonable? It needs some minor adjustments and a new glass, but does work.

    I think that’s to low to be honest. $3500 seems right to me is working 100%

    Promoted items from the Pinside Marketplace
    $ 17.50
    Playfield - Plastics
    Pinball Haus
    From: $ 14.00
    Playfield - Toys/Add-ons
    ModFather Pinball Mods
    $ 69.99
    Playfield - Toys/Add-ons
    Lighted Pinball Mods
    $ 17.50
    Playfield - Plastics
    Pinball Haus
    $ 18.99
    Matt's Basement Arcade
    $ 109.99
    From: $ 5.00
    Playfield - Other
    Rocket City Pinball
    $ 43.00
    Playfield - Toys/Add-ons
    The MOD Couple
    $ 7,699.00
    Pinball Machine
    Classic Game Rooms
    $ 48.00
    Cabinet - Other
    ModFather Pinball Mods
    $ 6.00
    $ 85.00
    Playfield - Toys/Add-ons
    Toast-Mach1 Mods Shop
    $ 50.00
    Playfield - Toys/Add-ons
    Just 3D Mods
    $ 90.00
    Playfield - Toys/Add-ons
    The Art of Pinball
    $ 99.99
    Lighting - Other
    Lighted Pinball Mods
    $ 7,999.00
    Pinball Machine
    Nitro Pinball Shop
    From: $ 19.95
    From: $ 21.50
    Playfield - Toys/Add-ons
    $ 10.00
    Playfield - Decals
    $ 40.00
    Gameroom - Decorations
    $ 199.99
    Lighting - Led
    $ 130.00
    Playfield - Toys/Add-ons
    ModFather Pinball Mods
    $ 125.00
    $ 16.50
    Playfield - Plastics
    Pinball Haus
    $ 79.00
    Playfield - Toys/Add-ons
    Pixels Arcade Games
    $ 25.00
    $ 10.00
    $ 229.99
    Lighting - Other
    Lighted Pinball Mods
    $ 19.95

    You're currently viewing posts by Pinsider skyemont.
    Click here to go back to viewing the entire thread.

    Hey there! Got a moment?

    Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside