Quoted from Cdonnerusmc:Ice Gold Beer. Haha decided to go with Gold instead of black T moulding.
[quoted image][quoted image]
Quoted from Cdonnerusmc:Ice Gold Beer. Haha decided to go with Gold instead of black T moulding.
[quoted image][quoted image]
Quoted from Cdonnerusmc:Ice Gold Beer. Haha decided to go with Gold instead of black T moulding.
[quoted image][quoted image]
I’m normally don’t go for goofy trim colors, but that actually looks pretty good. ICB could, dare I say, actually use a little bling.
I can’t believe I just used the word bling.
Okay, moving on....
Quoted from Cdonnerusmc:Ice Gold Beer. Haha decided to go with Gold instead of black T moulding.
[quoted image][quoted image]
I may need to copy you on this.
Quoted from Skyemont:A friend just sold a Zekes Peak which is the same thing basically for $3,900
Thanks for this.
So if I list it (or trade it) for 2500-2800 it seems reasonable? It needs some minor adjustments and a new glass, but does work.
Quoted from djblouw:Thanks for this.
So if I list it (or trade it) for 2500-2800 it seems reasonable? It needs some minor adjustments and a new glass, but does work.
I think that’s to low to be honest. $3500 seems right to me is working 100%
Quoted from djblouw:Thanks for the input. Anyone else have thought on pricing?
Anywhere between 2.5 and 3.5 depending on condition. My 2 cents.
Quoted from Tigger:Anywhere between 2.5 and 3.5 depending on condition. My 2 cents.
I think this is spot on. There is a timing component of all sales as well (is this a good time or bad time to get top dollar) which impacts price. I see nearly all of these in the $3k range give or take minor condition issues.
This not mine, but found it on eBay;
ebay.com link: Ice Cold Beer Taito working Arcade game pcb board cpu as shown board only
Quoted from djblouw:Thanks for this.
So if I list it (or trade it) for 2500-2800 it seems reasonable? It needs some minor adjustments and a new glass, but does work.
If you list it for $2500 it will be gone in minutes.
Quoted from teekee:If you list it for $2500 it will be gone in minutes.
Yep, that seems to be on the cheap end these days. A lot of demand for this game.
Quoted from huo:I have mine listed for sale. Is it best to just list on pinside or elsewhere (like klov?)
Other - For Sale
Taito Ice Cold Beer
Featured!
“Plays and looks great. I added leds to the flashing shots.
Ive owned this game for about 6 years now. No issues.
Everythings original except the piece of plywood on the lower bac...”
6 days ago
Clarkston, MI
3,700 (OBO)
huo
In my opinion, the pinball community will pay better prices than the arcade community for these.
That said, there’s no harm in giving your sale more exposure.
Quoted from Tinnhound:I would love to find one in Canada, if anyone is thinking of selling, let me know!
I have an all original ICB in nice condition. How does $4000 Cdn sound and I’ll meet you in Kindersley.
Quoted from Toontowntrader:I have an all original ICB in nice condition. How does $4000 Cdn sound and I’ll meet you in Kindersley.
That's about $3100 so that's a great deal!
Quoted from Toontowntrader:I have an all original ICB in nice condition. How does $4000 Cdn sound and I’ll meet you in Kindersley.
PM Sent, Thanks
Ice Cold Beer for sale or trade
The flourescent light in my game isn't tuning on. I want to replace. Does anybody know what the proper lamp and starter is? I can find a Taito part number but that doesnt help me.
I am also looking for tips on replacing the belts. I have the replacement belts that PBR sells but it is simply a single length of tubing. Should I simply divide that in half? Should I completely remove the old belts, save the coupling tab from each and then construct the new belts. Then I would assume just stretch each new belt over the pulleys and then adjust the length of belts in or outside the machine?
I assume all ICB owners have dealt with this at one time or another.
Kramertheman
20201230_183939 (resized).jpgQuoted from Kramertheman:Ice Cold Beer for sale or trade
The flourescent light in my game isn't tuning on. I want to replace. Does anybody know what the proper lamp and starter is? I can find a Taito part number but that doesnt help me.
I am also looking for tips on replacing the belts. I have the replacement belts that PBR sells but it is simply a single length of tubing. Should I simply divide that in half? Should I completely remove the old belts, save the coupling tab from each and then construct the new belts. Then I would assume just stretch each new belt over the pulleys and then adjust the length of belts in or outside the machine?
I assume all ICB owners have dealt with this at one time or another.
Kramertheman
[quoted image]
Are you selling?
Which LED's do I need for the coin door? I believe the incandescent bulbs are 1813 but wondering which ones work best (LED's).
Quoted from ChompingQuarters:Which LED's do I need for the coin door? I believe the incandescent bulbs are 1813 but wondering which ones work best (LED's).
I used these: https://cointaker.com/products/1815-super-a908283e-8a33-44de-ba5f-7776c5fe1fc2
Look great.
Quoted from jtreehorn:I used these: https://cointaker.com/products/1815-super-a908283e-8a33-44de-ba5f-7776c5fe1fc2
Look great.
Thank you. Did you do 44 LED's for the playfield and the control panel?
Quoted from ChompingQuarters:Thank you. Did you do 44 LED's for the playfield and the control panel?
Yes I did. Turned out nice.
Quoted from jtreehorn:Yes I did. Turned out nice.
Which ones did you purchase? Did you do bright white or warm white?
Quoted from ChompingQuarters:Which ones did you purchase? Did you do bright white or warm white?
Warm white. I put a red in #10 and also the start button.
my play field lights and my control panel light is not lighting up (at start up or during game play). I checked the fuses (all good) and checked test points on the board (12V and 5V all good). I don't appear to be getting voltage to the lights at all. So, wondering if anyone has any suggestions? I was scrolling through some old e-mails (Yikes, from July 2011) and was told to check to see if the ULN2003 (Was told "I have seen them go bad before"). So, guess I'll be starting there next and seeing if I can get these lights to light up. Guess I should of never sold the working ZP PCB years ago. Anything "not involving" replacing chips should I check next?
Quoted from ChompingQuarters:my play field lights and my control panel light is not lighting up (at start up or during game play). I checked the fuses (all good) and checked test points on the board (12V and 5V all good). I don't appear to be getting voltage to the lights at all. So, wondering if anyone has any suggestions? I was scrolling through some old e-mails (Yikes, from July 2011) and was told to check to see if the ULN2003 (Was told "I have seen them go bad before"). So, guess I'll be starting there next and seeing if I can get these lights to light up. Guess I should of never sold the working ZP PCB years ago. Anything "not involving" replacing chips should I check next?
Not sure if this will help but I was having issues where my lights would turn off randomly or not turn on at all. Installed this:https://www.arcadeshop.com/i/1182/taito-ice-cold-beer-zekes-peak-power-supply-kit.htm Haven't had an issue since.
Hi, i am thinking of building ice cold beer from scratch, i am just getting info at this time and am wondering if there is an ice cold beer/zeke pcb nos or rasberry pi program available?
Quoted from beini:Hi, i am thinking of building ice cold beer from scratch, i am just getting info at this time and am wondering if there is an ice cold beer/zeke pcb nos or rasberry pi program available?
There was a thread started on building out a homebrew ICB here:
https://pinside.com/pinball/forum/topic/diy-ice-cold-beer-type-game
Quoted from jtreehorn:Not sure if this will help but I was having issues where my lights would turn off randomly or not turn on at all. Installed this:https://www.arcadeshop.com/i/1182/taito-ice-cold-beer-zekes-peak-power-supply-kit.htm Haven't had an issue since.
Ok, my voltages are now not correct. Removed the power brick tonight and I unplugged J1 on the board and checked the voltages. What is weird is that Red 6 and 8 are 7.89 and 16.44 and Should be 25vac. But shouldn't they both be the same? I'm pretty against switchers but might make an exception this time.
Quoted from ChompingQuarters:Ok, my voltages are now not correct. Removed the power brick tonight and I unplugged J1 on the board and checked the voltages. What is weird is that Red 6 and 8 are 7.89 and 16.44 and Should be 25vac. But shouldn't they both be the same? I'm pretty against switchers but might make an exception this time.
I am not totally sure about the voltages. I installed the switcher back in August and the game has run like a champ since.
Quoted from ChompingQuarters:Ok, my voltages are now not correct. Removed the power brick tonight and I unplugged J1 on the board and checked the voltages. What is weird is that Red 6 and 8 are 7.89 and 16.44 and Should be 25vac. But shouldn't they both be the same? I'm pretty against switchers but might make an exception this time.
Ok, replaced the Bridge Rectifier Diode (larger ones) and reflowed solder... Then tested the BR81D and one was bad so I replaced both... I now have the correct voltages now and lights on the playfield. Yay(ish). However, the lights stay on 100% of the time (don't blink). I do have replacement ULN2003 chips (and sockets) so next step is to check to see if these are bad. From my notes I've been told that these chips help control the lights so fingers crossed that this resolves this.
What's the best way to remove the decals from the sides and the control panel overlay?
Does anybody sell the wood grain for the sides?
Quoted from TaTa:What's the best way to remove the decals from the sides and the control panel overlay?
Go to Harbor Freight and buy a heat gun. Then very carefully apply heat slowly and peel away old decals,etc.. I then had success using GOOF off adhesive remover in the spray can(not the bottle). May try This Old Game for decals?
If any of you fantastic people are ready to sell your Ice Cold Beer please drop me a PM as I am currently looking for one to buy.
Quoted from fridgejam:If any of you fantastic people are ready to sell your Ice Cold Beer please drop me a PM as I am currently looking for one to buy.
Can't let mine go but someone else has one for sale. Good luck!
Quoted from tslayer71:You get tickets for making the '10' hole or just progression?
I would set mine for “10” then turn in the ticket for a FREE BEER!!!
Though my college son stops after getting 10 5-6 time in a row, I will be broke once he hits drinking age!
Quoted from TomDK:I had it on my game, but it is sold already. In Europe every second game had the dispenser I guess.[quoted image][quoted image]
It’s interesting that in Europe a higher percentage of the machines have ticket dispensers than in the U.S.
When these were new, they were targeted to bars here in the U.S. as you couldn’t have beer advertising in arcades with kids.
Hence you also had Zeke’s Peak (the pc version) for an establishments with kids.
Same basic reason they came out with Root Beer Tapper as an alternative to Budweiser Tapper. I suppose this wouldn’t really be that big of a deal in a country like Germany or Belgium with a rich beer culture.
Do Zeke’s Peaks ever show up in Europe?
Here in the states when a person would reach the 10th hole, the star would light up on the scoring plastic. You would show it to the bartender and get a free beer.
I don't NEED it, but as with pins, I'm in the honeymoon phase and if there were a source for a new cabinet, I'd be interested in a price before I attempt cleaning up this cabinet. Any ideas? I read the previous 8 pages and nobody mentions price or availability.
Quoted from yzfguy:I don't NEED it, but as with pins, I'm in the honeymoon phase a d if there were a source for a new cabinet, I'd be interested in a price before I attempt cleaning up this cabinet. Any ideas? I read the previous 8 pages and nobody mentions price or availability.
All I know is that if ICB is going for 3-4k, that things worth it's weight in gold
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/ice-cold-beer-icb-owners-thread/page/9 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.