Yeah, not a lotta info on this one.

Working on one for customer. Doesn't go into attract mode. Gives error 0 if any switches are activated.

Hope to add photos of mine when it arrives in a few weeks time. I've purchased new sideart and T-molding to install.

Yes, the art came from ICE to the best of my knowledge, the seller organised it on my behalf. The molding I purchased from here https://www.t-molding.com/gold-t-molding.html

I had one years back. Sold it, really wish I would have kept it.

We bought these new but they were never a winner for us at the coin box. They played pretty good but the original is still a level apart from ICE's version imo.

Trizel as soon as my game arrives, I'll open it up and take some photos for you.

Any one know where I can send my boards to be checked?

ICE certainly services their PCBs. I've used them for NBA Hoops boards.

Ice doesn't repair I c b boards, said no longer have test equipment for them. No longer supported.

Game shows error "0" , which isn't listed in service manual. Never goes into attract mode. Gives the error after activating any of the buttons, joystick, or coin switch. Thanks for any help trying to fix for a customer.

Plays music shows 0 on display when booting then goes to error. Activating arm switches during boot gives appropriate error

15912746631862524128129701397908 (resized).jpg

15912049997798555834591997836642 (resized).jpg

Trizel, thanks for video. Mine not making through start up. Will check hole optos again.

Just a heads up, but I fixed my second icb. Game wouldn't boot. The cmos battery voltage was being pulled down to below 1v. It ended up being the sound chip, its a large 40 pin or so chip tht says winbound. Both my games had a sticker over it so they could mark the date probably for warranty purposes.

Got mine running, broken wire in ribbon cable pin 1.

Just picked one of these up and super stoked to join the club. However, I have noticed that as soon as you add a credit it starts a game opposed to requiring you to press start. Also, if you have multiple credits it will automatically start the next game. I did see how you may be able to change this. Does anybody know if this is normal?

That's what the one I worked on did. Only time start switch light came on was when the ball switch was out of adjustment, then you would have to press start button.

I don't think I recall being able to change this. I wired one of the buttons on the top to add a credit, so it essentially became the start button.

Thanks! I was thinking this may just be the normal. I can see how it is advantageous for the operator. After moving my game I realized that the board was not secured. Thankfully nothing was damaged. It appears that the board is just a hair too big to be secured in the control panel via the screw holes that are in there. Has anybody else come across this or have any recommendations on how to secure it?

I'm looking for another set of boards for my I.C.E. ICB , I suspect they need some serious work, long story. I had contacted I.C.E. over a year ago, and they couldn't help me. Mine might be able to be fixed by a professional. Can anyone help?

What problem are you having? Any error codes?

I recently was able to purchase a non working machine. With the help of my brother we got it going! I am looking forward a new playfield. Mine has come delaminated in many spots and bubbled up. It is causing some problems with the bar hitting the bubbles when going up and down the playfield. Does anybody know where to purchase a new playfield? Or does anyone have the artwork that I could get a copy and try to find a printer to print it. I imagine it would be difficult cutting out all the holes but worth the try. Thanks for your time, John

Yeah, I contacted innovative concepts manufacturer and they just replied that they don’t have any parts. Not sure what to do here. I guess I will try to use razor blade to cut the bubbles and glue them down. I really appreciate your response.

Hi I'm hoping someone might be kind enough to post some pics of their mpu (one under the joysticks). I was doing some board work and when I picked the board off the table I found this stray resistor laying on the bench. I'm not 100% this came off my board as this is a community work bench but I don't want to turn on my game until I'm sure. My jumper resistor is still in place on U6 topside but not sure if there is another point that has one on the front or back. Here's some pics of what I have now, the stray resistor is gold red black brown. Appreciate the help.

20210214_170427 (resized).jpg

20210214_170432 (resized).jpg

20210214_170440 (resized).jpg

Bump, I would really appreciate some pics

Hey, excited to have just joined this club!

Recognizing there aren’t a lot of parts available for this awesome game, what do you guys suggest for general maintenance besides keeping optos clean?

Thanks

Anyone know how to adjust the volume? Thanks

Thank you sir!

Hello folks,

Once you sink the 12th hole does the game always end? I know on the Taito version you can keep going and start over. Not sure if this is an error or a setting feature. I was on a continued credit (not in one credit) so that may have something to do with it. Thanks!

Just picked one of these up. Really enjoying the game it's just unfortunate you can't add credits and start the game when ready. I did remove the continue's so at least we aren't waiting 10 seconds for the game to reset.

Is it possible to erase high scores? If so, how do I reset those?