I stepped away from trying to fix my ICB but am going to make another go of it. I have 2 things going on that I think are related. First issue is that holes 3 & 4 rgb lights constantly switch from green, orange to red while in attract and game play modes. Also every other time I put a coin thru the slot the game will throw error 92. I have replaced the coin meter w a known working one and can say that it's not the issue (not sure why they even coded that error in the first place). Pretty sure I have a bad chip somewhere that's sending incorrect signals.
Also I'm hoping someone can post a picture of the backside of their MPU if they have it out of the game. Last year I was working on mine I found a loose resistor on the bench and not sure if it came off my board. It was a community bench I was using and could have been there before I got started. I have several jumpers and 1 resistor on the back that look factory, not sure if there should be another.
Thanks in advance for any and all help.

Oh, I hate when that Happens!

Perhaps the newest version will be at IAPPA this year!

Hope you are going

Still hoping someone would be kind enough to post some pics of the back side of their MPU board, thanks!

Bump would love some pics of the backside of the board under the joysticks

Here is the front and back of my board. Hope this helps.

20221114_123000 (resized).jpg

20221114_123026 (resized).jpg

Just picked up one of these beauties today and trying to track down the user manual - but the link provided in this thread no longer appears to work?
Any help would be greatly appreciated!

I have the manual and schematics for this game. I'm pulling it off the floor next week, so I will try to upload the manual when I pull it.

... also, does anyone know who works on these boards? I need service to fix some glitches that have become more noticeable.

Looks like pretty standard stuff. I would check with Rob A (borygard)...

That would be great, thank you.

Did you fix this issue? Mine is now doing the same thing.

I have not forgotten, I have been moving all my arcades to a new location... I started organizing everything this week... Schematic coming soon...promise.

Here is the manual!!!!!

ICE COLD BEER -I.C.E. 2002 - owner&service manual.pdf

Thank you!

New owner here . Aside from T molding, I just need a marquee. Looks like they had a custom one made for the cabinet we have. Any idea where abouts to find one? Or does anyone have a good scan that I can use to have my marquee guy make one?

Cheers

20230910_160514 (resized).jpg

Call ice, you can still by some parts for this one

Had a crappy marquee. Had my buddy whip us one up until we can find an OG one.

16972492020757966984051144910557 (resized).jpg

16972492211631259173960593203350 (resized).jpg

Just a quick question, maybe you guys know about this. I’ve been looking for an Ice Cold Beer machine but now I found this add for one from Taitel licensed from Taito. It seems to pay out money but for the rest it looks almost the same. Is this something worth considering?

how is the hopper wired up? to the ticket system? does that have modded / hacked roms?

I have no idea. There is not a lot of info and it’s from an auction website so I doubt if they can give me much info on the machine.
Google didn’t have any info on Taitel either

The ad said it was missing the keys and it’s a 90 minute drive from me so I’m not even sure if I can peek in the cabinet.

Back up and running. I think it took a power surge. I am a glad I have a local wizard that figured everything out and glad ICE still sells the hole sensors because a couple where fried.

18854 (resized).jpeg

Anyone work on these boards? My game will not boot and need some help. Starts up and doesn't go into self check, if I touch the joysticks the motors move the bar to the bottom of the game then it says ERR 00.

Anyone?

Anybody Still have their ice cold beer made by ice. I need e proms for mine help!

I am looking for XPK000135 Switch with Plate. Mine seems to not be working. Is there a way to verify if switch is working properly? Any idea which other switches are compatible?

Also any ideas where the wires get connected. I took it off without taking a picture of it. This switch is the one at the bottom which gets activated when the ball lands on it. The ball then rolls off the lever into the playing field.

Any help would be appreciated.

Limit Switch XPK000135 ICB by ICE (resized).jpg

Limit Switch XPK000135 (resized).jpg

Just a SWAG, but look at the other switches and see if there is a common colored wire to each one. Note where the common wire goes - NC, NO, C. See if you have that color and figure it goes there. For the other wire, same thing, it is likely colored differently from the other switches, but since it’s the “signal” wire, it will go to the NC or NO connection, just like the other switches.

Excellent ideas. Thank you for the tips. I will try.