Really need some help , just pick up a Haunted House , my first system 80 pin.
It have the Pascal Janin board , all the fuse are good , all the GI are lighting up but game does not boot and there is no display , if i let the game on for a little while i can hear the attract sound but that s it.

Should i start with re pinning the connector or looking for something else ...

Mike

Well my machine is equiped with only sound board and Pascal Janin 4 in 1 board , the connector are all original except one , you think I should start with this ?

Where do i check the voltage going to the board ??

I dont know from which connector is coming the power , but i see power leds ground and 12 V are lighted when i power on the machine.

Mike

Here is a few pics of the backbox , boards and where i think test point are , ill report back when tested

IMG_2139.JPG

IMG_2140.JPG

IMG_2143.JPG

IMG_2145.JPG

pdman , the pin was not working when picked up , the previous owner had it for 1 year and it always worked ok but when he moved it to a shop it stopped working , all connectors have been double checked , just made some voltage test on the board , most are ok except the TP for 8V , give me 0.16 v

RWH , i contacted Pascal , waiting for a response !!