Hi guys I have a few problems with my new pin (fishtales). The problem i cant figure out is the flashers. They are not working and if i replace the fuse at F111 it blows as soon as i power on the machine. Any one have some ideas on where to start? the other problem is the middle and lower string of lights in the backbox are not working. I feel I have found the problem causing that at J120 plug with a few burned spots and if I wiggle the plug they come on.

Thanks in advance
Alex

I just noticed this: the plug is plugged into J105 but the wires have a flag that says J104. Should I move the plug up to J104?

http://i1114.photobucket.com/albums/k530/boostedskex/FT/IMG_0723.jpg

IMG_0723.JPG

Ok so i put a new fuse in F111, pulled J107, powered the machine on and the fuse in F111 burned up. (I don't have my meter here it's at the garage)

So I take it my next step is to replace BR4? If so would point me to the correct one on Marco's website. I have a shopping cart of parts ready to order for it but I just want to make sure I am getting the correct one.

Is this the correct part for BR4?
http://www.marcospecialties.com/pinball-parts/KBPC3504-W

Thanks
Alex

Is it good sense to just replace all of the br (1-4) and all 4 caps or is that just overkill?

do you know what number the flasher connectors are that I should pull to try to diag?

hahahah ooops sorry didnt realize that was the flasher plug. Thanks man!