If I can get it without the flakes, this is probably the plan.
Sure I found another color that is the same without the flakes... Shoot.me a PM and we can work out the details....
Quoted from HemiOrange09:Sure I found another color that is the same without the flakes... Shoot.me a PM and we can work out the details....
I will when we get a FF. My wife decided she wants to wait until they hit the secondary market on this one. I'm already buying mods for it though.
Is there any sense of an average shipping cost for these (large and heavy) parts there and back from WA state? Have just come across this, and color me intrigued (pun intended?)
Quoted from zeldarioid:Is there any sense of an average shipping cost for these (large and heavy) parts there and back from WA state? Have just come across this, and color me intrigued (pun intended?)
It cost me approx $130 last Nov to ship a complete set of game parts to Steve one-way from the Seattle area via UPS. That included the coin door, wireforms, and shooter housing as well as the typical rails/hinges/lockdown bar/legs and required two separate boxes.
Quoted from zeldarioid:Is there any sense of an average shipping cost for these (large and heavy) parts there and back from WA state? Have just come across this, and color me intrigued (pun intended?)
Use pirateship. I just shipped 2 large boxes. The long one with the legs, lockdown, ect. was roughly 25 bucks and one for 2 coindoors was around 18 bucks. I'm much closer to Michigan than you, but couldn't be too much more than that.
Yes, just get a UPS quote from https://www.pirateship.com/ Since you do not have a UPS account, but you will have to have them boxed up so you know the sizes and weights. I was told about this website about 4 months ago.
I have done this color for other titles, but it will work great on the Foo Fighters Premium... I'll work on getting pictures of it installed on the FF Premium
20230519_155333 (resized).jpg20230519_155350 (resized).jpg20230519_155355 (resized).jpg20230519_161552 (resized).jpg20230519_161555 (resized).jpg20230519_162406 (resized).jpg20230519_162408 (resized).jpg20230519_163556 (resized).jpg20230519_164250 (resized).jpgI powder coated the Spider-Man armor set and it's for sale and ready to ship out.. I am offering free shipping on this set within the USA...
Quoted from HemiOrange09:I powder coated the Spider-Man armor set and it's for sale and ready to ship out.. I am offering free shipping on this set within the USA...
https://pinside.com/pinball/market/shops/1033-mi-pinball-refinery/08584-fs-spider-man-custom-blue-armor-set-with-smve-side-rails-
Here are a few pictures of the Spider-Man armor set
20230522_205023 (resized).jpg20230522_205347 (resized).jpg20230522_205419 (resized).jpg20230522_205835 (resized).jpg20230522_205838 (resized).jpg20230522_210326 (resized).jpg
Steve, you're da man. The pictures really don't do it justice for when you see it in person. Thank you for your excellent work, man. It was less than 2 weeks from day of shipping to my door, too. Thank you.
IMG_20230523_101850 (resized).jpgIMG_20230523_101752 (resized).jpgIMG_20230428_223244 (resized).jpgIMG_20230428_223221 (resized).jpgIMG_20230523_101806 (resized).jpgQuoted from javagrind888:That doesn't look like the same color twice for FF green. If they are different, what are they?
Those are 2 different greens for the Foo Fighter machines.... Different customers wanted different colors .
Quoted from HemiOrange09:Those are 2 different greens for the Foo Fighter machines.... Different customers wanted different colors .
One was the LE color, what was the other one?
Quoted from Lateralus:Steve, you're da man. The pictures really don't do it justice for when you see it in person. ...
I like my Godzilla's green color (done by Steve and selected by the game's original owner), but that is a nicely matching, as well as lizard-like, look. Well done!
Quoted from HemiOrange09:Those are 2 different greens for the Foo Fighter machines.... Different customers wanted different colors .
Whuh?! That's cR@zY talk!
Quoted from javagrind888:One was the LE color, what was the other one?
It is a totally different color from the FF LE color. I know what the LE color is as well.
Quoted from HemiOrange09:Here's a Ghostbusters Premium that wanted the LE and to match his proton blaster side rails
[quoted image][quoted image][quoted image][quoted image][quoted image]
I've never seen that hinge before. That's sweet!
Thanks... I was 1 set that I had sitting around from a long time ago and found it. I offered it to my customer and he was excited to get it from me with the powder coating job.
Quoted from HemiOrange09:I did this set for my personal Bride of Pinbot
[quoted image][quoted image][quoted image][quoted image][quoted image]
Thanks... it's a sweet looking color.
Yes I can powder coat them even if they are not new. If there is let's say, some surface rust, I have them media blasted and cleaned to raw metal before I powder coat them. If there are minor dents they will probably still show, but as long as you're OK with them I have no problem powder coating them for you.
Just drop me a PM and we can go over the details.
Here are some sets that I just shipped out... Guardians of the Galaxy Premium
20230601_164311 (resized).jpg20230601_164313 (resized).jpg20230601_165125 (resized).jpg20230601_165130 (resized).jpg20230601_165213 (resized).jpg20230602_082012 (resized).jpg20230602_082014 (resized).jpg20230602_082046 (resized).jpg20230602_082048 (resized).jpgJurassic Park Premium in the darker green vein that I offer
20230601_145544 (resized).jpg20230601_145955 (resized).jpg20230601_145956 (resized).jpg20230601_150118 (resized).jpg20230601_150120 (resized).jpg20230601_150400 (resized).jpg20230601_150402 (resized).jpg20230601_151151 (resized).jpg20230601_151154 (resized).jpg20230601_151253 (resized).jpg20230601_151259 (resized).jpgAnother GOTG in a darker purple this time.
20230513_120345 (resized).jpg20230513_120354 (resized).jpg20230513_120358 (resized).jpg20230513_120855 (resized).jpg20230513_121305 (resized).jpg20230513_121319 (resized).jpg20230513_121510 (resized).jpg20230513_121513 (resized).jpg20230513_123039 (resized).jpg20230513_123042 (resized).jpg20230513_123131 (resized).jpg20230513_123133 (resized).jpg20230513_125323 (resized).jpgHere another color for Foo Fighters Premium
20230607_143405 (resized).jpg20230607_143439 (resized).jpg20230607_143512 (resized).jpg20230607_144519 (resized).jpg20230607_144606 (resized).jpg20230607_144752 (resized).jpg20230607_144948 (resized).jpg20230607_145004 (resized).jpg20230607_145613 (resized).jpgIt would be cool to do a blue or purple vein (w/ black), and make the blue/purple w/ uv blacklight glow. Is that possible?
The only color that I have done in a UV/black light glowing vein is the lighter green vein for Godzilla.
Quoted from PBhead:Thanks for confirming. Any photos of how the vein appears under black light?
Here are some pictures of the Foo Fighters Premiums in those colors from my customers... here is the red with silver flakes
Screenshot_20230611_122741_Gmail (resized).jpgScreenshot_20230611_122750_Gmail (resized).jpgScreenshot_20230611_122755_Gmail (resized).jpgScreenshot_20230611_122759_Gmail (resized).jpgScreenshot_20230611_122803_Gmail (resized).jpgAnother set for a Foo Fighters Premium...
20230617_113247 (resized).jpg20230617_113533 (resized).jpg20230617_113536 (resized).jpg20230617_114015 (resized).jpg20230617_114016 (resized).jpg20230617_114019 (resized).jpg20230617_114047 (resized).jpg20230617_114225 (resized).jpg20230617_114432 (resized).jpg20230617_114433 (resized).jpgI love that rootbeer color for Iron Maiden and other games. Have you done that for GZ? I think several colors will work for GZ, including blue, light blue and different greens. But with King Ghidorah being tan, and plenty of earthy colors, I’m guessing that root beer would look great on GZ. Anyone have pics with that? Mine was done by Steve in Prismatic Universe, a holographic multicolor, and it’s just awesome.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/i-can-powder-coat-your-pinball-armor-for-29500-plus-return-shipping/page/17 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.