Highlands Ranch, CO
Quoted from CoOlSlY:When I throw a ball in the juggler, it doesn't register anything in the switch test.
Sounds like a switch problem to me.
(Topic ID: 232183)
You're currently viewing posts by Pinsider dno.
Click here to go back to viewing the entire thread.
Quoted from CoOlSlY:As said, in test mode, if I throw the ball in the left juggler, it doesn't register anything, if I then go in the solenoid test, and run the left juggler, it ejects the ball from the left juggler and the ball is sent to the right juggler, if I go back in switches test, the right juggler registers properly (closed)
So sounds like the left juggler switch.
Can you trip it by hand from under the playfield?
It's at the very back, on the VUK.
In switch test you can short the row/column to eliminate a board issue, but I would recommend looking for a broken wire on the row/column wires under the PF first.
Check every switch that the two wires share, they like to break off at stand up switched a lot, leaving the standup working, but the switches "downstream" not working.
Since that switch is at the back of the PF, it's probably the last in line.
You're currently viewing posts by Pinsider dno.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
