Quoted from maestro:My Hurricane has no lights on the coindoor. Test buttons dont register. I havent found any loose wiring. I traced the 6.3 voltage back to J119 on the power board. Pin 1 has 6.3 voltage. Pin 3 is 3 volts. My issue is I don't see a complete schematic of the board so I don't know where to check up the board for the issue. If anyone has a schematic of the board I could use it. Or a little coaching where to check next. A side note, LED 3 is flickering while all the others on the boar are lit solid.
The GI is 6.3 VAC (AC, not DC), You should be measuring with meter set to AC and one probe (doesn't matter which probe, as the AC is not polarized) on pin 1 of J119 and the other probe on pin 3 of J119. Then you should see about 6.3 VAC.
The schematic is on the website IPDB.com. The wiring to the coin door is on page 3-15. Your LED indications are normal.
You should also read the tech docs thoroughly http://techniek.flipperwinkel.nl/wpc/index.htm