looks beautiful
You're currently viewing posts by Pinsider stefanmader.
Click here to go back to viewing the entire thread.
Quoted from chrishoyle99:Hoping for a little help from the community here . I am changing my ferris wheel belt but really struggling to get the wheels back on after inatalling the new belt. Just seems impossible like the belt is too thick or there should be some kind of recess in the back of the wheel ... help
oh my god, i have changed the belt recently.
it's hard to give advice here, i struggelt a lot with it, i didn't take everything off.
i somehow managed to get the belt in position with a flat screwdriver, pushing it through the thin openings.
My lights on the clown face stopped working. When i had a look in the backbox, they suddenly worked again. And then they were out again.. What is happening? Does anybody have a tip for me? I suspect maybe a connector, but so far disconnecting and reconnecting did not help.
Quoted from stefanmader:My lights on the clown face stopped working. When i had a look in the backbox, they suddenly worked again. And then they were out again.. What is happening? Does anybody have a tip for me? I suspect maybe a connector, but so far disconnecting and reconnecting did not help.
so my backglas motor also didn't work that great all of a sudden. Also left outlane Light, and right inlane and outlane light.
decided to clean the fuses. that solved the problem. i guess there wasn't enough current for all lights?!
i don't know, but cleaning fuses seems to be the thing with my hurricane. that worked before on a different error.
Quoted from Philly76:Howdy! Im now in the Hurricane club! Found a beautiful resto in my area. New everything, sideart, RottenDog, super clean paint job and really nice overall machine. Payed $2600
My GI isnt that bright (It was fine when i got it) something is loose I suspect in the move. I know where it is on the board but havent resolved it yet.
i would never say i am an expert hihi, but for my experience with my hurricane, i would suggest cleaning the fuses .
that solved a lot of problems i had.
i would always guess that it is some connector, but in the end, my fuses had some dirt on them. and only when i took care of the fuses, everything was better after.
Quoted from JodyG:For posterity, you can now find the long requested lower Hurricane ramps here: https://rampomatic.com/collections/bally-williams-ramps/products/williams-hurricane-lower-ramp-a-14709[quoted image]
Installed this new beautiful ramp. Thank you Ramp-O-Matic!
IMG_20230121_085936.jpgi had the same problem, but for me i had lots of room to tighten the belt, is there maybe some screw you missed, so that you can tighten it further?
i think i had ordered this one from the netherlands:
https://www.ministryofpinball.nl/nl/catalog/product/view/id/2563/s/hurricane-rubber-drive-belt/
You're currently viewing posts by Pinsider stefanmader.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/hurricane-club-comet-and-cyclone-owners-are-also-welcome?tu=stefanmader and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.