#getaway-high-speed-ii
I hope this is the rite forum to post this.
I recently brought home a broken HS2. Sent out the boards for repair .
I then notice the slide hinges aren't functioning properly.
I have zero experience with this type of hinge so I'm not sure how they're supposed to work.
The right side looks like It's missing a washer and a pivot nut for the slide hinge.
Also, the spring has popped off the hinge and I don't know where the other end of the spring should attach.
The left side looks better however, I don't think it's in the rite position.
After searching through the forums, I found a picture of how I think it is supposed to look.
I'll post pictures of the "good" hinge first and then the left and rite of how mine look.
The good picture shows a cabinet slide plate where as I have Washers.
Here are my questions...
Should I add slide plates on to my shopping list and ditch the washers?
Where should the spring on the right attach?
Do I need new hinges or will mine be ok?
I saw a link to an old video but I kept getting a virus / security warning and couldn't go further.
Does anyone have a video of the slide hinges in action?
Trying to save $80 on hinges.
Any insight is much appreciated.
Thanks!